Casting Platform Install

[DaveD]

I have a 2013 Canyon 283, just bought the casting platform insert through Grady Dealer. Problem is not sure on the hardware location, anyone have a picture of the hardware location? I see the spot on the platform itself but not sure where latches go.

 

[Hookup1]

Sorry but I don't even know what a casting platform is!

 

[glacierbaze]

I believe it is the insert to fill in between the 2 bow seats.

 

[Fishtales]

I'd be onto Grady for that one. They should have supplied the installation instructions. You more than paid for them!

 

[DaveD]

I believe it is the insert to fill in between the 2 bow seats.
View attachment 29362

What i'm looking for is a picture of the dead bolt placement underneath to see where to screw them. Is that how yours are held in place? With 4 deadbolts underneath to remove the platforms if you wanted to take them out and run without them? Can you show me a pic of the bottom and where they latch to? Thanks a lot, appreciate you taking time to send me a pic.

 

[DaveD]

I'd be onto Grady for that one. They should have supplied the installation instructions. You more than paid for them!

That was my next call, thanks

 

[glacierbaze]

What i'm looking for is a picture of the dead bolt placement underneath to see where to screw them. Is that how yours are held in place? With 4 deadbolts underneath to remove the platforms if you wanted to take them out and run without them? Can you show me a pic of the bottom and where they latch to? Thanks a lot, appreciate you taking time to send me a pic.

Sorry, not my boat. I posted a pic in response to Hookup not knowing what a casting deck was in the post above mine.

 

[DaveD]

Sorry, not my boat. I posted a pic in response to Hookup not knowing what a casting deck was in the post above mine.

lol, thanks anyway