Cockpit light replacement

PDX-Boats

Well-Known Member
Joined
Dec 12, 2008
Messages
124
Reaction score
64
Points
28
Anyone know how to remove the cockpit dome light on a 2008 Express 305?
There are no bolts on the inside of the electronics box. The lens didn't seem to want to budge. I don't want to break it but can't see how it is attached or how you would replace a burt bulb.
 

drbatts

Well-Known Member
Joined
Nov 30, 2008
Messages
887
Reaction score
190
Points
43
Location
CT
Model
Express 305
My dome light which I believe is a lumitec touch light has 3 screws on the outside which will drop the light down.
 

Legend

GreatGrady Captain
Joined
Jun 29, 2006
Messages
1,462
Reaction score
201
Points
63
Location
Southern New England
Model
Sailfish
My dome light has a lens that u pry out. It is snug but gentle persuasion with a small screw driver should get the lens to pop. There is also a version that the lens twists 1/4 inch and pops out. If you have 3 smalll slots on the body of the light these are where the tabs on the lense get inserted and when turned the tabs lock in the slots. Most of the I have seen pop off with the gentle pry.
 
  • Like
Reactions: dude23455

Fishtales

Well-Known Member
Joined
Jan 31, 2005
Messages
8,031
Reaction score
1,286
Points
113
yup, pry the lens off and there should be 3 small screws holding it in place.
 

PDX-Boats

Well-Known Member
Joined
Dec 12, 2008
Messages
124
Reaction score
64
Points
28
You guys were right. It was a pry-out style. The lens was just stuck but a little slightly more forceful manipulation did the trick.
Thank you all for the replies!