Deck storage

patrick16

Well-Known Member
Joined
May 4, 2005
Messages
59
Reaction score
1
Points
8
Why are there no hatches in the floor/deck of Grady boats? Can they be added?
 

SeanC

Well-Known Member
Joined
Jun 16, 2015
Messages
358
Reaction score
216
Points
43
Location
Brisbane, Australia
Model
Seafarer
All hatches, insulated ice boxes are above the waterline so they can drain directly overboard instead of into the bilge where the water needd to be pumped out. No fishy smelling bilge and keeps it dry.
 
  • Like
Reactions: A&J Outdoors

Fishtales

Well-Known Member
Joined
Jan 31, 2005
Messages
8,033
Reaction score
1,286
Points
113
Can be added buy as stated you would need to make them waterproof from the deck and either drain into bilge (not recommended) or come up with a way to evacuate via pump. For the latter, I'd investigate connecting to an existing line that drains overboard.
 

seasick

Well-Known Member
Joined
Aug 19, 2008
Messages
9,531
Reaction score
1,420
Points
113
Location
NYC
Can be added buy as stated you would need to make them waterproof from the deck and either drain into bilge (not recommended) or come up with a way to evacuate via pump. For the latter, I'd investigate connecting to an existing line that drains overboard.
I am not a fan of sharing discharge ports. A check valve should be added to both drain hoses to prevent back flow. Even then, the check valve will be prone to getting stuck open due to the crud that is often found in below deck storage lockers. Many below deck box designs use a macerator pump for that reason, to reduce clogging.
 

Fishtales

Well-Known Member
Joined
Jan 31, 2005
Messages
8,033
Reaction score
1,286
Points
113
Not optimal but works if you can't or don't want to put another thru hull in the boat. Check valve on both lines is a requirement.
 

Recoil Rob

Well-Known Member
Joined
Mar 23, 2019
Messages
295
Reaction score
55
Points
28
Age
69
Location
CT Coast
Model
Sportsman
I put a hatch in the rear of my 180. I did it so I could gain access to mount an in-hull transducer. Not much room down there for much else with all the foam...

IMG_0042.JPG