Dock box inside slip

Annie1996

Member
Joined
Dec 22, 2022
Messages
7
Reaction score
0
Points
1
Model
Freedom 285
Our condo dock is not wide enough to accommodate any type of dock boxes. Was thinking of getting a triangular one and support/secure it inside my slip. It would still be a couple of feet away from the boat and properly padded… just in case. Any thoughts/ideas?
 

Attachments

  • IMG_3458.jpeg
    IMG_3458.jpeg
    775.5 KB · Views: 38

PointedRose

Well-Known Member
Joined
Feb 11, 2021
Messages
677
Reaction score
212
Points
43
Location
San Francisco
Model
Overnighter
Will be a bit awkward with the pylon. Can I ask what stuff you need to store? Seems to end up being things like an old hose, old towel and old misc parts accumulated in those things.
may end up dropping stuff over the edge, again the pylon - it is right where the hasp would be, so you would need a few inches clearance.
Btw - did you check with the condo association? They aren’t usually receptive to the ‘ask for forgiveness later’ approach.

but otherwise that’s where the triangle shaped boxes would generally go. See if you can make a trex platform for it in the corner maybe
 

Ekea

Well-Known Member
Joined
Aug 11, 2020
Messages
623
Reaction score
205
Points
43
Age
39
Location
Mid Atlantic
Model
Chase
that looks good. id be even less worried about it since it looks like you have a lift
 

Annie1996

Member
Joined
Dec 22, 2022
Messages
7
Reaction score
0
Points
1
Model
Freedom 285

Will be a bit awkward with the pylon. Can I ask what stuff you need to store? Seems to end up being things like an old hose, old towel and old misc parts accumulated in those things.
may end up dropping stuff over the edge, again the pylon - it is right where the hasp would be, so you would need a few inches clearance.
Btw - did you check with the condo association? They aren’t usually receptive to the ‘ask for forgiveness later’ approach.

but otherwise that’s where the triangle shaped boxes would generally go. See if you can make a trex platform for it in the corner maybe
Thank you. Will discuss with the condo association but this could actually be a good solution for a lot of my neighbors. The plan is to have a relatively small box (<60” at its widest), to store my fillet table, some maintenance essentials, and few fishing things.

Would love to see if anyone has done this and how it looks.
 

drbatts

Well-Known Member
Joined
Nov 30, 2008
Messages
881
Reaction score
190
Points
43
Location
CT
Model
Express 305
In our marina there is plastic triangular piece between the main dock and the finger just like you drew in your picture. That is where some people put dock boxes. So if your marina allows it that would be the place for it. Our docks are floating, but not sure it really matters. The dock box is great for cleaning supply's, extra fenders, dock lines etc.
 

Annie1996

Member
Joined
Dec 22, 2022
Messages
7
Reaction score
0
Points
1
Model
Freedom 285
In our marina there is plastic triangular piece between the main dock and the finger just like you drew in your picture. That is where some people put dock boxes. So if your marina allows it that would be the place for it. Our docks are floating, but not sure it really matters. The dock box is great for cleaning supply's, extra fenders, dock lines etc.
Thank you. That is exactly what I was thinking. Do you happen to have any pictures?
 

Fishtales

Well-Known Member
Joined
Jan 31, 2005
Messages
7,981
Reaction score
1,272
Points
113
I'd evaluate how much space you will actually get and how you will use it. Looks like a fairly small area from the pic.