Dock Line Source

kirk a

Well-Known Member
Joined
Sep 26, 2009
Messages
405
Reaction score
132
Points
43
Location
Massachusetts
Model
Express 330
Just had my reminder from a West Marine email that I need to replace the dock lines for my 330 this winter - where is the preferred vendor for these? Planning on braided lines, 5/8".

Thanks
 

DennisG01

GreatGrady Captain
Joined
Sep 1, 2013
Messages
7,228
Reaction score
1,354
Points
113
Location
Allentown, PA & Friendship, ME
Model
Offshore
Just had my reminder from a West Marine email that I need to replace the dock lines for my 330 this winter - where is the preferred vendor for these? Planning on braided lines, 5/8".

Thanks
Dock lines can be purchased just about anywhere - I wouldn't say there's really a "preferred" vendor or anything like that. But a company like NE Ropes is a known-good manufacturer. However, if you buy from a local store you should be getting good ropes from them, as well.

BUT... how does WM know you need new ones? Sounds like a scam to get some money from you.

There is absolutely no "set time" to replace them. Replacement is done on an as-needed basis. Inspect them. Wash them if you want and then soak in water/fabric softener. Should be good to go after that.
 
Last edited:

kirk a

Well-Known Member
Joined
Sep 26, 2009
Messages
405
Reaction score
132
Points
43
Location
Massachusetts
Model
Express 330
LOL sorry for not being clear. I made a mental note last fall that my lines needed replacing. The email came today, which reminded me that I needed to replace them. Of course, it would be a lot funnier to say that I was just telling my wife that I need to buy dock lines last night and big brother notified WM who sent me an email...
 
  • Haha
Reactions: SkunkBoat

Sailfish

Well-Known Member
Joined
Dec 31, 2018
Messages
65
Reaction score
15
Points
8
Age
58
WM is having a dockline sale right now, so BIg Brother may know already...
 

seasick

Well-Known Member
Joined
Aug 19, 2008
Messages
9,571
Reaction score
1,443
Points
113
Location
NYC
With respect to line diameter, it is a general rue that it should be 1/16 inch times the length of the dock or boat cleat in inches. For example a 6 inch cleat would best fit a 3/8 inch line. 8 inch takes a 1/2 in line and a 10" cleat suits a 5/8 line.
You should select a line diameter based on the cleats on your boat and hopefully your dock cleats are a similar size.
I use braided nylon as it has a bit of stretch. It does get stiff over time and when it is a pain to undo a line because it is stiff, it's time to replace
 
Last edited:

DennisG01

GreatGrady Captain
Joined
Sep 1, 2013
Messages
7,228
Reaction score
1,354
Points
113
Location
Allentown, PA & Friendship, ME
Model
Offshore
LOL sorry for not being clear. I made a mental note last fall that my lines needed replacing. The email came today, which reminded me that I needed to replace them. Of course, it would be a lot funnier to say that I was just telling my wife that I need to buy dock lines last night and big brother notified WM who sent me an email...
Ha! OK, that's better! I gotta admit, I was a little worried :) Either that, or I was going to send you an email that stated it was time to send Dennis some money.....
 

SkunkBoat

Well-Known Member
Joined
Oct 12, 2017
Messages
4,530
Reaction score
1,621
Points
113
Location
Manasquan Inlet NJ
Website
www.youtube.com
Model
Express 265
Just had my reminder from a West Marine email that I need to replace the dock lines for my 330 this winter - where is the preferred vendor for these? Planning on braided lines, 5/8".

Thanks
5/8 is a pretty hefty line even for a 330... I would think.


The WM brand and the NE Ropes are both good when you get them on a big sale.
 

seasick

Well-Known Member
Joined
Aug 19, 2008
Messages
9,571
Reaction score
1,443
Points
113
Location
NYC
I've used both 1/2 and 5/8. I prefer 1/2. It is plenty strong and much easier to cleat. 5/8 for heavy weather conditions maybe.
Breaking strength aside, using a larger diameter line on a small cleat can be more prone to line slip.
 

drbatts

Well-Known Member
Joined
Nov 30, 2008
Messages
895
Reaction score
192
Points
43
Location
CT
Model
Express 305
Try Defender too. When they start to get stiff just run them through the washing machine with fabric softener. 1/2" also tends to work better if you have multiple lines tied to a single cleat.
 

PointedRose

Well-Known Member
Joined
Feb 11, 2021
Messages
690
Reaction score
214
Points
43
Location
San Francisco
Model
Overnighter
I agree 5/8 isn’t needed in general use. You might visit docks that can only use 1/2 or even 3/8 so have a few smaller lines on board just in case if you go larger
 

Fishtales

Well-Known Member
Joined
Jan 31, 2005
Messages
8,080
Reaction score
1,300
Points
113
Just had my reminder from a West Marine email that I need to replace the dock lines for my 330 this winter - where is the preferred vendor for these? Planning on braided lines, 5/8".

Thanks
5/8" is the right size for the lines. I'd inspect. You can get several years out of them. I like the black ones from West Marine - just wait for a sale.