Dome light upgrade

[RobboNJ]

Hookup, how did you remove the dome light from the ceiling? I can't figure out how to remove the fixture. My spreaders have stopped working and I think it may be the switch. Previously, they worked intermittently. I'm going to check the wiring, but am curious as to how to remove the light fixture. A few pics of the light fixture attached.

 

[Hookup1]

The two screws inside the fixture are they bolted inside the electronics. Mine are Philips head inside the box and nuts inside the dome light.

Your's look different. I don’t see the nuts in the dome light. Maybe screws inside the overhead box? Check there where the wires come thru. I’ll bet they glued a block inside the fixture. I see what looks like glue around the two holes and wires.

If you need part number and source for switches let me know. DigiKey has them.

 

[Hookup1]

512PB-ND 10-amp SPST for spreader lights
40-4325-00 Judco Manufacturing Inc. | Switches | DigiKey

Order today, ships today. 40-4325-00 – Pushbutton Switch SPST Standard Panel Mount, Rear from Judco Manufacturing Inc.. Pricing and Availability on millions of electronic components from Digi-Key Electronics.
www.digikey.com www.digikey.com

522PB-ND 2-amp SPDT for alternating red or clear courtesy light
40-3657-00 Judco Manufacturing Inc. | Switches | DigiKey

Order today, ships today. 40-3657-00 – Pushbutton Switch SPDT Standard Panel Mount, Rear from Judco Manufacturing Inc.. Pricing and Availability on millions of electronic components from Digi-Key Electronics.
www.digikey.com www.digikey.com

I checked availability. Plenty in stock.

 

[RobboNJ]

Yes, it does seem like the light is glued tothe ceiling. I removed two smll mounting screws, but the light is still firmly attached to the ceiling. That's why I asking about how you removed yours. Mineis on a 2008 Sailfish. I'm going to check the wiring for the spreaders, as I think that is the issue. But, if need be, I'll pull the light fixture as well. Thanks for your reply and the Digikey info.

 

[Hookup1]

Yes, it does seem like the light is glued tothe ceiling. I removed two smll mounting screws, but the light is still firmly attached to the ceiling. That's why I asking about how you removed yours. Mineis on a 2008 Sailfish. I'm going to check the wiring for the spreaders, as I think that is the issue. But, if need be, I'll pull the light fixture as well. Thanks for your reply and the Digikey info.

What "two small mounting screws"? Inside the electronics box or inside the dome light? You can try a thin paint scraper and work the black gasket edge. Shouldn't be much holding it up.

 

[Halfhitch]

Hookup, how did you remove the dome light from the ceiling? I can't figure out how to remove the fixture. My spreaders have stopped working and I think it may be the switch. Previously, they worked intermittently. I'm going to check the wiring, but am curious as to how to remove the light fixture. A few pics of the light fixture attached.

It's been a few years since I removed that light on my previous Grady, but I seem to remember working a small thin screwdriver under the edge of that round plastic piece that holds the bulbs. It just pops out. Once that was worked out of there, you will see two screws holding the main fixture. That's how I remember mine.

 

[Hookup1]

It's been a few years since I removed that light on my previous Grady, but I seem to remember working a small thin screwdriver under the edge of that round plastic piece that holds the bulbs. It just pops out. Once that was worked out of there, you will see two screws holding the main fixture. That's how I remember mine.

He got the plastic dome off. He is trying to drop the dome light assembly. Mine was the same as yours but his is probably screwed in from inside the electronics box.

 

[RobboNJ]

Thanks for your replies. If I need to remove the dome, I'll try the paint scraper under the fixture. Will get back to you after I check the wire connections and fuse box.

 

[Hookup1]

Thanks for your replies. If I need to remove the dome, I'll try the paint scraper under the fixture. Will get back to you after I check the wire connections and fuse box.

Check inside the overhead box for screws into the fixture. That's my bet what is holding it on. Don't break the fixture! They are impossible to find.

 

[Legend]

Hookup, how did you remove the dome light from the ceiling? I can't figure out how to remove the fixture. My spreaders have stopped working and I think it may be the switch. Previously, they worked intermittently. I'm going to check the wiring, but am curious as to how to remove the light fixture. A few pics of the light fixture attached.

If you are wondering how to get to the screws, the dome light cover pries off. Its tricky but a small flat head can do the job.

 

[Hookup1]

If you are wondering how to get to the screws, the dome light cover pries off. Its tricky but a small flat head can do the job.

He has the cover off. Look at the photos above. It looks like a block was epoxyed into the base and secured from inside the electronics box.

 

[Diad]

I just ordered these switches and the rubber boots. Also ordered some new spreader lights off of Amazon. This is my next projecT. This site is so helpfu!! now that I think about it, should pick up some of these light bulbs too

 

[A&J Outdoors]

I replaced mine with a red/white from Amazon then ran the spreaders to a switch on the switch panel.

 

[Finatic272]

I had the same problem. I purchased a new dome light and drilled a hole into the side of

 

[Finatic272]

Sorry I had my last reply cut off. Fat fingers.
as I was saying I had the same problem. I purchased a new dome light. Then drilled a hole in the metal trim of the light. Then installed the spreader light switch in the new light.

 

[Nole]

My problem is also mostly the UV damage. The light works it just looks terrible. The other option I have is to run the spreader switches off of an acc switch and then replacing the dome light with one that is readily available...

 

[Hookup1]

I found the fixture on eBay. You have to rework the base. It work for me. Now I have a few spares.

Spreader Light switch

I have the stock light switch on my 232 2004 hanging from my radio box. It controls a white/red light with one small black switch and the spreader lights with another black switch. The spreader "button" or switch quit working. I can not figure out how to get into this light. their are two...

www.greatgrady.com

4-MARINCO GUEST DOME LIGHT 12V iCLEAR LENS MOUNT ANY WHERE #8018-LS | eBay

Find many great new & used options and get the best deals for 4-MARINCO GUEST DOME LIGHT 12V iCLEAR LENS MOUNT ANY WHERE #8018-LS at the best online prices at eBay! Free shipping for many products!

www.ebay.com