Edson Steering Knob

[Dand1]

Does anyone know the model number of the Edson steering knobs/ Knob that fits the later model Grady steering wheels

 

[Fishtales]

I think it is universal. Here's the link.
Edson Marine: ProSeries PowerKnob

 

[Fishtales]

For the a bit more you can get a wheel with the integrated ball. GW uses Schmidt.

Schmitt Model 721 Evolution Elite Boat Steering Wheel 13 1/2" - 15 1/2" Diameter with Glass Ball Bearing Control Knob - 3/4" Tapered Shaft - Seatech Marine Products, Inc

 

[Dand1]

For the a bit more you can get a wheel with the integrated ball. GW uses Schmidt.

Schmitt Model 721 Evolution Elite Boat Steering Wheel 13 1/2" - 15 1/2" Diameter with Glass Ball Bearing Control Knob - 3/4" Tapered Shaft - Seatech Marine Products, Inc

Thanks Very Much Might Be A Lot Easier To Just Get New Wheel

 

[wspitler]

I added the Edson knob and it has worked great!

 

[Fishtales]

The nice thing about the new wheel is the ball is pressed in on one of the three spokes. Nice clean look and no strap on the wheel.

 

[Keeldad]

We have the Edson on our 226 and it is very handy. Just pay attention on those occasions when you are standing rather close to the helm. It will remind you if you forget.

 

[NiceBass 272]

Amazon has some off market ones for under 20$

 

[Ky Grady]

Amazon has some off market ones for under 20$

Probably more trouble than they are worth. Cheaply made and will rust out or lock up in short order.

 

[SkunkBoat]

I bought a cheap one on a gamble. it did not fit because the clamp was round but the wheel is oval in cross-section.
I still cannot bring myself to pay $80 for a good knob

 

[DennisG01]

I ponied up for an Edson a few years ago... that thing is HEAVY! I don't mean that in a bad way - far from it - thick/solid SS... it feels like a 1957 Chevy's bumper compared to a 2021 Hyundai. Once you have it in your hand, the price makes sense. And a 50-year warranty to boot!

I'd give them a call and tell them the dimensions of your steering wheel.