Have a 2005 226 Seafarer..I need to replace the Hinges for the Electronics Box Doors and the Console Do Anyone know the part numbers and/or Manufacturer?
Electronics Box Hinges....
- Thread starter L.R.
- Start date
- Joined
- Mar 1, 2006
- Messages
- 3,027
- Reaction score
- 1,351
- Points
- 113
- Location
- Berea, KY/Cross, SC
- Model
- Seafarer
L.R. said:
Just did this on my 2004 228.
Grady number, according to invoice, is 10-210. $22.95 each. Can't help on Manufacturer.
I bought these from boatoutfitters.com a few years ago. Plastic Adjustable Torque Hinge 1.69" x 1.44" [Southco] 058-3847 [E6-10-301-10] Color: Black price was $13.32 each in 2013.
Fishtales
Well-Known Member
- Joined
- Jan 31, 2005
- Messages
- 8,033
- Reaction score
- 1,286
- Points
- 113
https://www.southco.com/en-us/e6-at?hid=7347&q=marine hinge
I believe Southco makes them. Once you ID the match, you prob need to get from one of the net dealers.
I believe Southco makes them. Once you ID the match, you prob need to get from one of the net dealers.
- Joined
- Mar 1, 2006
- Messages
- 3,027
- Reaction score
- 1,351
- Points
- 113
- Location
- Berea, KY/Cross, SC
- Model
- Seafarer
Just looked at the Southco ones, not a direct match for what I had. Not to say they won't work. The 10-210 from Grady are a direct match to my original ones.
Search the web for Southco detent hinge. The model line is C6. You need to select the force and the detent angle. The angle you have can be estimated by swinging the existing door and feeling where the detent currently is. If the springs are shot that may be difficult to feel. You can estimate by where you remember the door snapping into the detent. The force is not super critical unless you have a really heavy door. I seem to remember that the model number is stamped somewhere on the old hinge on a metal part not the plastic. Try looking at where the hinge pin is inserted into the hinge bushing.
GW will tell you the detent for your hinge. replaced all of mine in 2017 ('09 330). my model was southco C6-26.
D.B. Roberts was the distributor. first purchase there. really efficient. good luck, ron
D.B. Roberts was the distributor. first purchase there. really efficient. good luck, ron
Got hinges on Amazon. Company was ESSENTRA Components. They are Southco SC-465. I installed a set on the electronics box. Still have to do the consul box. How do you get behind the consul box to attach the nut?
- Joined
- Mar 1, 2006
- Messages
- 3,027
- Reaction score
- 1,351
- Points
- 113
- Location
- Berea, KY/Cross, SC
- Model
- Seafarer
- Joined
- Mar 1, 2006
- Messages
- 3,027
- Reaction score
- 1,351
- Points
- 113
- Location
- Berea, KY/Cross, SC
- Model
- Seafarer
- Joined
- Mar 1, 2006
- Messages
- 3,027
- Reaction score
- 1,351
- Points
- 113
- Location
- Berea, KY/Cross, SC
- Model
- Seafarer
wrxhoon
Well-Known Member
I want to replace my electronics box hinges ( one is broken) . I checked DB Roberts, they are listed $16.28 each, still much cheaper than GW. How much d they charge for shipping L.R.?
If it is the hinge shown in KY’s picture above, the area on each side of the pin is actually a cover which pops up, and the screws are underneath on each corner.
Yes but the nuts on the backside of those screws are hidden in between the plastic dash trim and the fiberglass. Looks like you need to cut the caulk bead and remove the plastic dash completely to access the nuts. Am I wrong?