Freedom 235 Battery Removal

ScituateBoater

Active Member
Joined
Jul 3, 2021
Messages
42
Reaction score
4
Points
8
Age
63
Model
Freedom 235
Unable to remove old batteries from the stern hatch. The insulated aft cooler prevents the battery from tilting to provide clearance through the hatch. Any advice would be greatly appreciated. Thanks, Rob
 

ScituateBoater

Active Member
Joined
Jul 3, 2021
Messages
42
Reaction score
4
Points
8
Age
63
Model
Freedom 235
Thanks. I don’t think the cooler is removable. With no experience, was thinking that removing some insulation might be the simplest and safest approach
 

DennisG01

GreatGrady Captain
Joined
Sep 1, 2013
Messages
7,189
Reaction score
1,341
Points
113
Location
Allentown, PA & Friendship, ME
Model
Offshore
So... the batteries were obviously installed AFTER the boat was built... which means they'll come back out :)

I see some type of tank in that picture, but not of the batteries? Where are they in relation? Can you post a pic of the cooler from the topside (with door open)?
 

ScituateBoater

Active Member
Joined
Jul 3, 2021
Messages
42
Reaction score
4
Points
8
Age
63
Model
Freedom 235
So... the batteries were obviously installed AFTER the boat was built... which means they'll come back out :)

I see some type of tank in that picture, but not of the batteries? Where are they in relation? Can you post a pic of the cooler from the topside (with door open)?

First of all, greatly appreciate your help. The batteries are under the hatch to the left and I can get the battery to the opening however they are tilted at an angle that prevents from fitting through the opening. Will get out to the boat and take more pictures (it's on a mooring). Thanks!
 

family affair

Well-Known Member
Joined
Jul 31, 2010
Messages
1,437
Reaction score
339
Points
83
Location
Ohio
Model
Islander
Holy hell! I thought my battery access sucked! That is a whole nother level there.
I'd love to know how many worker comp claims Grady dealers have for trashed backs and shoulders from trying to do bilge/battery work.
Scit, what is the black hose for in front of the battery? Does removing it provide better access - if practical?
 

ScituateBoater

Active Member
Joined
Jul 3, 2021
Messages
42
Reaction score
4
Points
8
Age
63
Model
Freedom 235
You're correct my back was very sore after the initial attempt and then I had a friend assist a second time. The hoses are for the livewell and I think the livewell was a bigger obstacle than the front. Will confirm with my friend that was on the left side. thanks,
 

ScituateBoater

Active Member
Joined
Jul 3, 2021
Messages
42
Reaction score
4
Points
8
Age
63
Model
Freedom 235
You're correct my back was very sore after the initial attempt and then I had a friend assist a second time. The hoses are for the livewell and I think the livewell was a bigger obstacle than the front. Will confirm with my friend that was on the left side. thanks,
 

seasick

Well-Known Member
Joined
Aug 19, 2008
Messages
9,531
Reaction score
1,420
Points
113
Location
NYC
As I get older, I find that I am more interested in what is under the deck than above it. That's to say, easy access is a very important factor. That includes maintenance things like pumps, batteries, gen set access and everyday things like sea cocks. I haven't gone as far as checking scupper hose and fitting access:) YET!
 

ScituateBoater

Active Member
Joined
Jul 3, 2021
Messages
42
Reaction score
4
Points
8
Age
63
Model
Freedom 235
I resolved this issue by removing some insulation from the aft cooler.
 
  • Like
Reactions: nuclear

wlewis

Well-Known Member
Joined
Jun 19, 2008
Messages
266
Reaction score
13
Points
18
Location
Savannah, Ga
Looks similar if not worse than my 225. I had to lay on my stomach, reaching out to lift batteries , tilt them forward and out of the opening. Scraped some of the insulation off of the cooler bottom, but managed to get them out. Glad I don’t have to do it often.