Fuel tank lid recore

[ReelRowdy]

Had a couple of soft spots in the lid that were isolated right around the aft section. When I tore into it, over half the wood had moisture.

 

[ReelRowdy]

After several hours, ready for new core

 

[ROBERTH]

Reelrowdy, not sure if you have already seen this discussion, but might add some tips for you. viewtopic.php?f=3&t=20908

 

[ReelRowdy]

Cut the core out using 5/8 untreated, left an inch and half or so gap and beveled the edges.

 

['84Offshore]

Flattered that my post was highlighted...........