I have a 2005 Marlin with FP 4.2 generator. Started the generator today and I have water and exhaust coming out of a box in the bilge. I'm not exactly sure what the box is called but I know the exhaust and water both exit the boat through this box. I looked to see if it was a cracked hose but the water and exhaust were coming out the back of the box where it was mounted. Any help is greatly appreciated. If i need to post more details I'll gladly answer any questions. I should add this box is not attached to the generator.
Generator help
- Thread starter Family Tradition Fishing
- Start date
Fishtales
Well-Known Member
- Joined
- Jan 31, 2005
- Messages
- 8,030
- Reaction score
- 1,286
- Points
- 113
The manual shows two potentials. The water lock I believe is a check valve and should be closest to the generator. The Silencer (aka muffler) is a stock item to mitigate noise. Not sure if GW uses the latter or a special one. Hope that helps.
Thank you Fishtales I was thinking silencer/muffler but a quick Google search produced nothing for sale. I guess I'll need to look deeper or call the dealer. Thanks again for the reply.
Fishtales
Well-Known Member
- Joined
- Jan 31, 2005
- Messages
- 8,030
- Reaction score
- 1,286
- Points
- 113
send an email to parts@fischerpander.com a guy named Josh helped me a few years back, not sure he is still with them.
If you don't have the manual ask them or try google "Marine Generator Panda PMS 4200 FCB". There is a parts list as well. Their repair center is in FL.
1-954-4622800.
If you don't have the manual ask them or try google "Marine Generator Panda PMS 4200 FCB". There is a parts list as well. Their repair center is in FL.
1-954-4622800.
Fishtales
Well-Known Member
- Joined
- Jan 31, 2005
- Messages
- 8,030
- Reaction score
- 1,286
- Points
- 113
Hi,
Was poking around and found the following link.
http://www.marinewarehouse.net/fischerpanda.html#PANDA4200
The low profile muffler is $300. I'd take a picture of the leaking unit and give them a call for details.
Was poking around and found the following link.
http://www.marinewarehouse.net/fischerpanda.html#PANDA4200
The low profile muffler is $300. I'd take a picture of the leaking unit and give them a call for details.
Is this muffler made of fiberglass? If so, there's a good chance it can be easily fixed.
Does it have a drain hole (normally plugged for operation... sometimes with a screw)? If so, maybe it was left open after winterization or has come loose.
Does it have a drain hole (normally plugged for operation... sometimes with a screw)? If so, maybe it was left open after winterization or has come loose.
Fishtales, you're the man... The low profile muffler looks almost identical. The only difference I can see is the outlet exits the top and the one I currently have exits the side. I'll order that one and have it fixed in no time. Many thanks for the help.
Dennis I live down in Florida so I dont really winterize the boat. Actually the winter is my favorite time to fish. We get a pretty solid run of Wahoo up here in NE Florida. Thanks for the reply though. This forum is a super resource.
Dennis I live down in Florida so I dont really winterize the boat. Actually the winter is my favorite time to fish. We get a pretty solid run of Wahoo up here in NE Florida. Thanks for the reply though. This forum is a super resource.
Still worthwhile to check to see if you have a drain that has come loose. Stick your phone down there, or use a mirror on a stick, if you can't see it normally.
But... is it fiberglass? Easy/cheap to fix.
But... is it fiberglass? Easy/cheap to fix.
Dennis I'm fairly certain its metal and I dont think it could be a plug. The water/exhaust are coming out the back of the silencer which is sandwiched against a structure in the bilge. I will check for a plug and the material it's made of when I pull it out this weekend. Thank you for the input. I will report back once I get this resolved.
Just a quick update. Ended up emailing GW and they put me in contact with Fisher Panda. Super helpful on both ends, I'm impressed with the customer service so far. I ordered a replacement from FP and it was here in 3 days. The new muffler/silencer is made of fiberglass and cylindrical instead of rectangular, similar in size with minimal modifications to mount it. I looked hard at going with the marine warehouse direct replacement but decided to go with the FP replacement because they said they'd had issues with the direct replacement hence why they changed design. I'll be installing next Friday and will send pics when done. Thanks again to Fishtales and Dennis for all your help.