Hello, I am trying to figure out what is wrong with the water pressure on the 223. The switch goes on and nothing. I am trying to get water to come out of the gunwale faucet. Please help me trouble shoot. Thanks
Grady White 223 water pressure question
- Thread starter dredey
- Start date
Parthery
GreatGrady Captain
I'm assuming you have filled the water tank.
Check the pump first and make sure you have power to it. On a 223 it's located on the bulkhead next to the battery on the starboard side. Disconnect the wiring and put a meter or test light on it to see if you have power to the pump. If you do, the pump is bad. If you don't, then move up under the dash and see if either a wire has come disconnected or the breaker popped.
Check the pump first and make sure you have power to it. On a 223 it's located on the bulkhead next to the battery on the starboard side. Disconnect the wiring and put a meter or test light on it to see if you have power to the pump. If you do, the pump is bad. If you don't, then move up under the dash and see if either a wire has come disconnected or the breaker popped.
Parthery
GreatGrady Captain
On mine it goes to a breaker on the panel. I think that's how they start out life when they leave the factory. In my experience though, sometimes things get rewired along the way.