hairline gelcoat cracks

Rustygaff

Well-Known Member
Joined
May 6, 2015
Messages
252
Reaction score
55
Points
28
Location
Misquamicut, RI & Melrose, CT.
Model
Freedom 255
Getting ready to cover the 255 for the winter and was putting on a quick coat of wax. While wiping off the wax I discovered some horizontal hairline cracks in the gelcoat on the hull side about 8" up from the water line. The cracks are 8 to 10" long. The are very thin and one would would have to look hard to see them. Any concern or normal wear and tear? My best guess these may be from bumping into the corner of the dock when backing into my slip. My son, when operating the boat would sometimes use the dock corner as a pivot on windy days when docking. Please note the attached pic is inverted. The cracks are horizontal.
 

Attachments

  • gelcrack.JPG
    gelcrack.JPG
    114.3 KB · Views: 764

ElyseM

GreatGrady Captain
Joined
Nov 18, 2007
Messages
949
Reaction score
54
Points
28
Location
highlands, nj
hard to see, but from things i've seen in the past they do look like impact cracks. if so, probably deeper than just gel coat. if it were my boat i would definitely have it fixed. also, i would install some high quality dock fenders to absorb any impact. i've never used those big corner wheel fenders, but they do look pretty sturdy. good luck, ron
 

Ozz043

Well-Known Member
Joined
Aug 13, 2014
Messages
188
Reaction score
12
Points
18
I agree, I would have them looked at preferably by a surveyor not a repair guy. While he's there he could look over the boat anyway, possibly point out other areas of concern. Always a lot to learn from a good surveyor.
I have fender wheels on each corner, they work well I like them.

Ozz