hard top paint

Joe arrigo

Well-Known Member
Joined
Jul 17, 2020
Messages
175
Reaction score
4
Points
18
Age
56
Location
New Jersey
I'm thinking of giving my hard top a coat of white paint its dull and want it to look cleaner any suggestions on type of paint I have some white deck paint will this work ??
 

blindmullet

Well-Known Member
Joined
Oct 19, 2015
Messages
449
Reaction score
106
Points
43
Location
Florida
Model
Explorer
Is it textured? If not, wet sand and buff it.
 

DennisG01

GreatGrady Captain
Joined
Sep 1, 2013
Messages
7,189
Reaction score
1,341
Points
113
Location
Allentown, PA & Friendship, ME
Model
Offshore
youcouldpaintitifyouwantbutsinceit'sgelcoatitmightbeeasierandfastertojustbuffandwaxlikementionedabovewhatsyourplanonpaintingandhowtocleanitupfirstanydecentexteriorpaintcanwork
 
  • Like
Reactions: SkunkBoat

SkunkBoat

Well-Known Member
Joined
Oct 12, 2017
Messages
4,508
Reaction score
1,614
Points
113
Location
Manasquan Inlet NJ
Website
www.youtube.com
Model
Express 265
Mine is textured. I'm going to compound it. If it looks "good enough" then wax it.

if that isn't good enough I will use some left-over 2 part epoxy bottomkote as a primer and cover with good old Rustoleum oil based exterior gloss white... $9 qt

Once you paint something you will be committed. Try to avoid it.
You don't want to deal with chips, bubbles and peeling.
If you are going to paint you need to clean it really well and then use a non-wax rubbing compound then clean it really well again

then prime & paint. Any exterior one part urethane will be good for that location
 

drbatts

Well-Known Member
Joined
Nov 30, 2008
Messages
887
Reaction score
190
Points
43
Location
CT
Model
Express 305
Try compounding it first.
 

Fishtales

Well-Known Member
Joined
Jan 31, 2005
Messages
8,031
Reaction score
1,286
Points
113
It's textured. I've used Woody Wax on it each spring, Brings the color right back. It is a petroleum based product so it only lasts about 6 weeks in the sun. Not sure I'd go to the trouble to paint, but your call. The skin is fairly thin, so be careful with it.
 

efx

Well-Known Member
Joined
Jun 19, 2018
Messages
268
Reaction score
87
Points
28
Location
Los Angeles
Model
Islander
Clean it really well, then 2 coats epoxy prime kote and then 2 coats interlux perfection. Add texture additives to keep it nonskid. It’s a long process but will turn out well. It’s all roll on. I’ve done this to many whalers and lasts over 5 years if done well.
 
  • Like
Reactions: Joe arrigo

SeanC

Well-Known Member
Joined
Jun 16, 2015
Messages
358
Reaction score
216
Points
43
Location
Brisbane, Australia
Model
Seafarer
I compound it using an upholstery brush on an orbital polisher. Works great on the non-skid decking as well.