Helm switches new label

[cbau50]

I just finished adding an engraved plastic
Strip to my helm switches on 330 Express. I didn’t want to re-do the whole panel & break wires etc. New Wire Marine, Jeff Phillips / (843) 297-8348 Chris 918-510-9615
Check out my 330 Express for sale in FS section.

 

[Bayhouse]

Why not just replace the rocker switch covers?

 

[Goose77]

Both those options look good.

 

[seasick]

What is connected to the switch marked GAS?

 

[Ky Grady]

What is connected to the switch marked GAS?

If it's like mine, that switch toggles between the the sending units on a main/auxiliary tank setup.

 

[Bayhouse]

For anyone interested, I picked up the new actuator covers at New Wire Marine. On my 2003, I ordered the Contura II Printed Switch Covers.

 

[cbau50]

What is connected to the switch marked GAS?[/QUOTE

Yes, both gas tanks to 1 gauge.

 

[cbau50]

Why not just replace the rocker switch covers?

Didn’t think about that being an option.
Looks great
Just wanted to let folks know a simple easy to read option.View attachment 10020

 

[TMC PARTS]

We sell direct from Grady switch cover replacements here at Taylor Marine Center. They are exact to what came on the Grady's from 2001-2009. We carry the following in stock:

Accessory
Nav Light
Fwd. Bilge
Aft Bilge
Horn (red)
Water Pressure
Raw Water
W/S Wiper
Cockpit Light
Macerator
Main/Aux Fuel
Elec. Box
Livewell

Hope this helps somebody.


Josh
Parts Manager
Taylor Marine
302-422-9177

 

[Ridge Runner]

Why not just replace the rocker switch covers?View attachment 10020

Looks good. Just ordered me a set in blue...

 

[trapper]

Josh, how much is the set and do you ship to Canada? Thanks trapper

 

[Fishtales]

GRADY WHITE OLD STYLE ROCKER SWITCH COVER SET 2001-2008 | eBay

THIS IS A NEW, DIRECT FROM GRADY PART. USE THESE TO REPLACE YOUR FADED UN-LEGIBLE ROCKER SWITCH COVERS. NAV/ANCHOR, MAIN/AUX FUEL, WASHDOWN, LIVEWELL, COCKPIT LIGHT, AND MACERATOR SWITCH COVERS. PART NUMBER 16-970 THROUGH 16-982.

www.ebay.com

$108

 

[SeaVee]

I got the covers from Taylor and it made a huge improvement

 

[captain swag]

How hard is it to unsnap the old covers off?

 

[Greyduk]

It is very simple to remove the switch covers. There is a plastic tool for that. Look for "Carling Switch Cover Tool".

 

[PNW_Drifter]

If it's like mine, that switch toggles between the the sending units on a main/auxiliary tank setup.
View attachment 10025

What does the Electrical Box switch do? I don't believe I have that.

 

[Ky Grady]

What does the Electrical Box switch do? I don't believe I have that.

That was one I put in. My Lowrance network has a powered hub that needed juice and didn't want it hot all the time, also didn't see a way to have it power up with one of the head units.

 

[NORTONP]

I need to replace the acc switch, anyone have a part #, I believe it is a Carling Switch but they make 100's of variations of that switch

 

[PDX-Boats]

I spent the money and redid the whole thing. I'm happy with the results. It's a Grady and it's worth the money IMO.

 

[NORTONP]

I spent the money and redid the whole thing. I'm happy with the results. It's a Grady and it's worth the money IMO.
View attachment 20818

did you replace all of the switches or just the covers?