- Joined
- Jun 24, 2006
- Messages
- 33
- Reaction score
- 0
- Points
- 6
- Location
- LEWES DELAWARE
- Model
- Tournament 205
Hello All
Not sure if any one can help but here it goes:
Went to top off my fresh water this morning on my new 2021 Fisherman and seemed that water running very slow out of nozzle. I went to service the fresh water located toward the forward seat bulkhead left and ran water till coming out of service entrance. Cleaned the nozzle and also went into stern and cleaned screen element. I then pulled up the inspection caps located in stern and noticed a lot of water draining towards back and immediately turned bilge pump on to rid the excess water. I ran pump and water did come out at normal speed from nozzle but I suspect there has to be a leak somewhere and worried if I have a bad tank or a loose line somewhere in the system. It is a steady flow of water leaking so has me worried I cannot think of anything else and cannot find any decent drawings any where of a blue print or breakdown how the lines are routed. Of course the boat will go to Grady for repair but wanted to make sure if anyone has seen this and or now is the service people going to make this problem worse. Added a few Images
Not sure if any one can help but here it goes:
Went to top off my fresh water this morning on my new 2021 Fisherman and seemed that water running very slow out of nozzle. I went to service the fresh water located toward the forward seat bulkhead left and ran water till coming out of service entrance. Cleaned the nozzle and also went into stern and cleaned screen element. I then pulled up the inspection caps located in stern and noticed a lot of water draining towards back and immediately turned bilge pump on to rid the excess water. I ran pump and water did come out at normal speed from nozzle but I suspect there has to be a leak somewhere and worried if I have a bad tank or a loose line somewhere in the system. It is a steady flow of water leaking so has me worried I cannot think of anything else and cannot find any decent drawings any where of a blue print or breakdown how the lines are routed. Of course the boat will go to Grady for repair but wanted to make sure if anyone has seen this and or now is the service people going to make this problem worse. Added a few Images
Last edited: