help with parts manufacturer

[devildogdad]

I have a Marlin 300 and need a part. It is the twist off deck plate that is used to access the pull rods for the seacocks. It is OD 8 inch, ID 7 inch. I have looked and looked but can not find an exact match. Nothing is imprinted on the plastic itself Thanks

 

[Fishtales]

Try Beckson Marine. They make the screw in and pop out versions for GW.

 

[eppem]

Second that, they are around the corner from my office and nice group. Ask for Steve, tell him the guy that just returned the black cupholder sent you.

 

[devildogdad]

Beckson does not list an 8 inch twist out on their website

 

[ElyseM]

if it is oem, call GW and they will tell you the mfg. also, make sure that you are comparing the correct dimension. good luck, ron

 

[journeyman]

Beckson does not list an 8 inch twist out on their website

They do, but the outside Dia is 10", and the inside Dia is 8.5". Look near the bottom.
http://www.beckson.com/screwout.html

I just replaced the pry out deck plates in the transom area with Beckson 6" twist outs (DP64-N). The outside Dia is 8", inside Dia 6", hole Dia 6.5". They fit perfect, even the screw holes.

 

[devildogdad]

according to GW the part is no longer made. so I need to figure out how to replace it.