Help

KandC

Member
Joined
Mar 25, 2020
Messages
13
Reaction score
0
Points
1
Age
46
Location
Cocoa, Florida
Model
Marlin
has anyone dealt with cracks like these before and so you think the are cosmetic or structural
 

Attachments

  • 20200513_110000.jpg
    20200513_110000.jpg
    1.3 MB · Views: 56
  • 20200513_105912.jpg
    20200513_105912.jpg
    1.9 MB · Views: 55
  • 20200513_105917.jpg
    20200513_105917.jpg
    1.6 MB · Views: 55
  • 20200513_110006.jpg
    20200513_110006.jpg
    1.7 MB · Views: 56

Bloodweiser

Well-Known Member
Joined
Feb 10, 2020
Messages
650
Reaction score
169
Points
43
Age
51
Location
Northern Cal
Model
Seafarer
hard to till from my screen, is this your boat ? or a potential purchase ?
 

KandC

Member
Joined
Mar 25, 2020
Messages
13
Reaction score
0
Points
1
Age
46
Location
Cocoa, Florida
Model
Marlin
Bought the boat end of last year. Had been on the hard for 8 years only 450 hours on her.
 

KandC

Member
Joined
Mar 25, 2020
Messages
13
Reaction score
0
Points
1
Age
46
Location
Cocoa, Florida
Model
Marlin
Its on both sides about the same spot. Trying to get it to a grady dealer next week for their opinion
 

SmokyMtnGrady

Well-Known Member
Joined
Jul 11, 2009
Messages
2,020
Reaction score
504
Points
113
I am not a structural engineer but I have played one in my mind before. It seems to me it's cracked bottom coat over the years. There does not appear to be a crack going north of the paint. Paints get old , get brittle and crack especially if there is some flexing, heating and cooling. Until you can truly see under the paint or have an x ray taken or get a real pros opinion , you may either have a cracked hull or just cracked paint.
 

KandC

Member
Joined
Mar 25, 2020
Messages
13
Reaction score
0
Points
1
Age
46
Location
Cocoa, Florida
Model
Marlin
its threw the paint on the starboard side it is above the paint line
 

PrinceofThieves

GreatGrady Captain
Joined
Jul 19, 2016
Messages
81
Reaction score
11
Points
8
Location
Brooklyn, NY
Grab a scraper and knock all those layers off that'll just fall off and then hit it with a sander to till you get to gel coat and then you should know what you're dealing with.
 
  • Like
Reactions: ScottyCee

KandC

Member
Joined
Mar 25, 2020
Messages
13
Reaction score
0
Points
1
Age
46
Location
Cocoa, Florida
Model
Marlin
Check the first picture it is threw at least the gel coat it extends above the water line hoping its not structural and just brittle thick gel coat
 

Fishtales

Well-Known Member
Joined
Jan 31, 2005
Messages
8,030
Reaction score
1,286
Points
113
can you get inside access to see if ok inside? a vertical crack like that seems funny unless where the glass layers meet. Could just be the outer layers that can be fixed fairly easily. I'd let a glass guy have at it.
 

Sparkdog118

Well-Known Member
Joined
Apr 8, 2020
Messages
629
Reaction score
134
Points
43
Age
54
Location
Ft Myers, fl
Model
Offshore
Looks like moisture getting under gel Cote. I agree with fishtale in that I don’t think it is structural. Just top layer damage.
 

Summertop511

Well-Known Member
Joined
Jan 21, 2017
Messages
315
Reaction score
68
Points
28
Location
NJ
Model
Seafarer
Seems like it was blocked wrong maybe? Do you have a pic of how it was blocked for 8 years. Just a guess
 

wrxhoon

Well-Known Member
Joined
Apr 4, 2012
Messages
958
Reaction score
291
Points
63
Location
Sydney Australia
It doesn't look good, hopefully it's only on the gelcoat but I think it may be old damage on the F/G. Not an ex hurricane boat that was repaired? In any case you will have to sand it down to F/G to see how deep it is and take it from there.
 

KandC

Member
Joined
Mar 25, 2020
Messages
13
Reaction score
0
Points
1
Age
46
Location
Cocoa, Florida
Model
Marlin
She was blocked along the keel with 4 boat stands keeping her up right. Takes no water into the bilge. As soon as I get her back from the shop replacing the fuel lines I'll be running her to a grady dealer. Was hoping some one here may have seen this before.
 

seasick

Well-Known Member
Joined
Aug 19, 2008
Messages
9,531
Reaction score
1,420
Points
113
Location
NYC
Did you say there was a similar crack on both port and starboard sides?
 

seasick

Well-Known Member
Joined
Aug 19, 2008
Messages
9,531
Reaction score
1,420
Points
113
Location
NYC
The probability of a 'stress' crack in the gel coat appearing on both sides in the same place is just about zero in my mind. I tend to think that there is a serious structural failure on that hull. It needs to be looked at. I don't suggest being under the hull when on the boat stands.
 

seasick

Well-Known Member
Joined
Aug 19, 2008
Messages
9,531
Reaction score
1,420
Points
113
Location
NYC
Good luck. Let us know what you find, it is an interesting condition and hopefully not too serious.