How do I remove this cushion please.

[JustEnough]

Good evening all. I plead ignorance and can’t figure out how to remove this bolster. The cushion is on the Port side, stern access door of a 375 Freedom. I assume the holes on the bottom are for drainage. Do I just “muscle it up” since I can’t find any screws?
Thanks for the help.

 

[glacierbaze]

push up on the inboard edge of those drain grommets and flatten them toward the door panel, and you will probably find some Phillips head screws if you poke around with a screwdriver. You may be able to slide a credit card, or a plastic putty knife behind the bolster to locate the screw position. Remove the screws, and lift straight up.

 

[JustEnough]

push up on the inboard edge of those drain grommets and flatten them toward the door panel, and you will probably find some Phillips head screws if you poke around with a screwdriver. You may be able to slide a credit card, or a plastic putty knife behind the bolster to locate the screw position. Remove the screws, and lift straight up.

Thank you - just didn’t want to dig around without checking first. Greatly appreciated.