How many Grady owners carry spare props on board?

[ksgoldman]

I took delivery of my 2010 Grady White Tournament 275 with Twin Yamaha 150's on April 15th this year (and of course absolutely love the boat!!!). My question to other Grady White owners is how many of you carry spare props on the boat while boating? The reason I ask is that with my prior boat (a 2006 Seaswirl Striper 2101 Dual Console with a single Yamaha 150), I carried a spare prop just in case I damaged my prop while boating (so that I would have a way to get home other than by being towed). Ironically I kept the spare from my Striper (since it was from a Yamaha 150) but I'm now debating whether to get a second prop for the other engine to keep on board. Of course with dual engines, I'm probably in better shape given that it's unlikely that I would damage props on both engines (and could always gt home on one if one is damaged). I do carry spare fuel filters on board (both the on engine filter as well as the larger in boat filters) as well as spare plugs.

Thanks,

Ken

 

[Workdog]

I have twin Merc 150 EFIs with Flow Torque hubs in the props. I carry extra plastic sleeves and the tools to change em out.

 

[capt chris]

I'm not saying I'm right, but I've owned outboards since 1987 all with stainless steel props and have never carried a spare prop. It's alot of money to have tied up in something you may never use. I prefer good towing coverage which covers more problems than just a damaged or spun prop.

 

[NOTHING ELSE MATTERS]

Never did and never needed up to now.

 

[magicalbill]

Kept a spare in my old MFG boat for 18 years..Never used it, so I don't nowadays.....

Oops..Now we've all jinxed ourselves....

 

[BobS]

Spare Props

My boat had aluminum props on it when I bought it. When I ugraded to SS, the aluminum props went in a forward locker as spares.
BobS

 

[BobP]

I carry a spare motor!

 

[nick1048]

I have an older aluminum prop I keep onboard in case something happens to the s.s. I keep on the motor. As a kid I needed a prop one time and didn't have one, on a small aluminum boat I had, so I carry one now just in case.

 

[J-cubed]

I carry a comp prop as a spare.

 

[Marty grady 272]

I carry a spare prop for each engine. My regular props are stainless steel, my spares are lighter weight, lesser cost aluminum props that I got 2nd hand on ebay

 

[SmokyMtnGrady]

I carry a spare...

 

[nick1048]

I just figure nothing bad can come of it and obviously anything can happen while you're out there. They take up minimal space, and if you use it once in 20 years it's done its job. Can't hurt

 

[ElyseM]

i have a spare engine.

i'm also a member of both seatow and towboatus.

for me, there is no way i would get out of the boat in open water to change a prop. but, i'm a wuss. ron

 

[ocnslr]

We purchased our Islander 270 new in March 2002, with a single 250HP OX66. I carried a spare prop and all the gear needed to change it out on the water.

We repowered in Nov 2005 with twins (gotta love the F150s), and no longer carry a set of spares.

Brian

 

[drbatts]

I have been thinking about the same question all winter long. I came to the decision that the others have come too. I have never needed to change a prop out while boating, but I do relize S*!* happens. I cannot picture myself changing a prop while drifting in the water. I would much rather crack a cold one and wait for sea tow to come get me. plus I do have a second engine.

 

[no problem]

It's a spare engine for me also. Try to remove a piece of debris from your lower unit at sea. Then imagine changing a prop and not dropping at least 1 part overboard.

 

[boatz]

Spare props

I have a spare prop for each engine. I figure if they are there I will never need them. If not there you always know what happens.

 

[92 fisherman 20]

Spare prop = common sense

Better to have it and not need it than... Need it and not have it...

 

[Legend]

I have been thinking about the same question all winter long. I came to the decision that the others have come too. I have never needed to change a prop out while boating, but I do relize S*!* happens. I cannot picture myself changing a prop while drifting in the water. I would much rather crack a cold one and wait for sea tow to come get me. plus I do have a second engine.

I agree - I took one of mine off this past April in the boat yard and it was not something I could ever envision doing on the ocean. Imagine trying to get that cotter pin back in with waves breaking over your stern. The beer and waiting for a tow idea is my type of fix. Already paid Seatow for the 10 th year and luckily have never had to use them.

 

[Gmanoffshore]

I run Mercury Mirage props so all I need is a spare flo torq hub kit. In most cases the plastic/nylon hub will shatter before any prop damage occurs and the Merc props give me much better mid range and overall performance than the yammy props did.