Hydraulic Trim Tab Motor

[Fishin' Rod]

My Bennett trim tabs are not working at all. There is current to the motor because every time I push both switches to either bring both tabs up or down my battery alarm on my fish finder goes off. I also checked the fuse and replaced it to be sure too.

I have been trying to find a replacement motor and I am not having any luck. Is the motor made by Bennett?

 

[Fishin' Rod]

Sorry Guys I found it. The search was "Bennett 12V Trim Tab Hydraulic Power Unit".

 

[max366]

I thought I had to replace my hydraulic pack when I sold my old boat and I search for a good price. Found these guys at around $220:
http://www.baitnhook.net/bennett-v351hp ... --12v.aspx

Turned out I had a bad ground wire so I did not need the pack, but these guys were great to deal with on the return. Maybe you'll be lucky and it will only be a bad ground wire! (but if your voltage is dropping, it sounds like something is seized)

 

[Fishin' Rod]

Thanks for the reply and link. I did find one at HodgesMarine.com http://www.hodgesmarine.com/BENNETT-HYD ... 51hpu1.htm. They seem real reasonable and they don't hit you with tax too.