looking for GW replacement items ? Where to find

[Pat Hurley]

Looking to replace curtains in a 2007 Marlin. Also looking to replace hinges on the overhead electronics boxes. Does Grady sell this stuff ?

Thanks in advance

 

[TortugaBob]

Hinges, did the research Southco, Amazon had them https://smile.amazon.com/Southco-C6...ent+Hinges&qid=1604443612&s=industrial&sr=1-1
This was the strongest one, but still not quite as good as he OEM, but fine.
Curtains, you may have to custom make some, but the best place for all the little parts is Sailrite. They have the Rails, the small slides, clips, etc. https://www.sailrite.com/

 

[Pat Hurley]

Thanks Bob

 

[Doc Stressor]

Grady now gets most of their SS hardware through Marine Town. They have a good selection of hinges and all of the stuff I've gotten from them has been good quality.

Marine Town Hinges

 

[Blaugrana]

Do any of the marine town hinges have detent point so the panel can stay locked either 80, 115, etc?

 

[Doc Stressor]

Anything listed as a friction hinge will do the job. They are designed to have constant torque throughout their range. So they hold in any position as long as you match the hinge to your load.

 

[Timbo]

Looking to replace curtains in a 2007 Marlin. Also looking to replace hinges on the overhead electronics boxes. Does Grady sell this stuff ?

Thanks in advance

Boat outfitters sells the friction hinges

 

[Pat Hurley]

Thanks for the replies fellas

How about port and starboard cabin screens for the Marlin ? Can they be ordered from the dealer ? It appears they have a plastic frame that pops out of the rubber gasket. Mine have seen better days

 

[TortugaBob]

I had emailed Grady about these too, and was referred to an old OEM with some stock, but was told you just need to get a local screen replacement dealer.

 

[Pat Hurley]

I had emailed Grady about these too, and was referred to an old OEM with some stock, but was told you just need to get a local screen replacement dealer.

Got the same spcheel today from a local dealer who told me Grady uses a different supplier nowadays .... mine is a 2007 and to go to a local screen shop. I don't think that will work since the frame is plastic that has become brittle over time and exposure