Looking for nav light - Freedom 255.

Capt Bill

Capt Bill

GreatGrady Captain
Joined
Mar 23, 2005
Messages
805
Reaction score
45
Points
28
Location
First State
Model
Sailfish
This new-to-me 2012 Freedom 255 has a dead nav light. I removed it today, and measured the voltage at the light, and it was 12.8V, so the LED is burned out. Port side works great, but I may replace them both, when I find the source.

And that leads me to my question; anyone here know the brand name (it's nowhere to be found on the fixture), or have a source for same look and footprint? I would like to replace it with one that mounts to the same mounting holes, and has the OEM look. Here's a photo.

Navlight2.jpgNavlight1.jpg
 
G

glacierbaze

Well-Known Member
Joined
Jul 6, 2012
Messages
2,488
Reaction score
644
Points
113
Age
75
Location
Chapel Hill and Pine Knoll Shores, NC
Model
Seafarer
Last edited:
  • Like
Reactions: Capt Bill
G

glacierbaze

Well-Known Member
Joined
Jul 6, 2012
Messages
2,488
Reaction score
644
Points
113
Age
75
Location
Chapel Hill and Pine Knoll Shores, NC
Model
Seafarer
The ebay link had more than 10 pairs. If there is more than one LED in the fixture, I would check my connections at the plug. They don't usually all burn out at once.
 
Capt Bill

Capt Bill

GreatGrady Captain
Joined
Mar 23, 2005
Messages
805
Reaction score
45
Points
28
Location
First State
Model
Sailfish
The LED matrix is sealed in plastic, with a moulded in Fresnal lens. Voltage to the lamp assembly is correct, and connector pins clean.
I placed an order at the ebay link you provided (thanks again), and I couldn't put it in the cart at first. Reason is the seller is away, and shipping will be delayed. When I agreed to that, it let me place the order.

I did find the same Atwood lights here, Atwood navigation lights, but they don't include the connector, and there is $10 flat rate shipping, so I decided to get the one with the connector.
 
You must log in or register to reply here.