- Joined
- Jun 5, 2020
- Messages
- 1,289
- Reaction score
- 601
- Points
- 113
- Age
- 62
- Location
- Santa Cruz Mountains, CA
- Website
- mcvoy.com
- Model
- Seafarer
I run Scotty downriggers and a crab pot puller in gimbal mounts that go in my rod holders. A while back we discussed this and people thought that the rod holders were not strong enough, the fiberglass is not strong enough.
So here is a report back. I was pulling crab pots, got 3 out of 4, the 4th did not want to come up. I've heard about this, it is like a snag, you try pulling from different directions to unsnag it. No joy. So we cleated the line and pulled that way, I could move it at 4mph on the GPS but it wouldn't come up. Pulled again, put it back on the puller and pulled with me and my buddy pulling. We pulled so hard that we bent the Scotty gimbal, it leaned over.
I looked today and so far as I can tell, the Grady handled it fine. I have a 2020 so it may be that they have beefed things up, but those rod holders are tough.
So here is a report back. I was pulling crab pots, got 3 out of 4, the 4th did not want to come up. I've heard about this, it is like a snag, you try pulling from different directions to unsnag it. No joy. So we cleated the line and pulled that way, I could move it at 4mph on the GPS but it wouldn't come up. Pulled again, put it back on the puller and pulled with me and my buddy pulling. We pulled so hard that we bent the Scotty gimbal, it leaned over.
I looked today and so far as I can tell, the Grady handled it fine. I have a 2020 so it may be that they have beefed things up, but those rod holders are tough.