Can anyone tell me about this? I just bought a 1996 192 tournament. It looks to be factory
Attachments
-
87D3F047-8AA5-429F-80AE-A09D79833DAE.jpeg
Mysterious Canvas
- Thread starter Jim wick
- Start date
-
- Tags
- canvas 192
Wish I could help ya I have a 95 192 with full canvas that I have owned since new and I have no Idea what this is ,it will be interesting to find out
i have full factory canvas for a 190 and no idea either.
guesses would be anchor locker cover, piece that fits between windshield and bow tonneau, or maybe a stretcher piece made for a shrunken factory canvas that no longer fits.
guesses would be anchor locker cover, piece that fits between windshield and bow tonneau, or maybe a stretcher piece made for a shrunken factory canvas that no longer fits.
That is what I was thinking too after looking at it more is it might be is a anchor locker cover which would be a good thing to have
I looked at that but there are no snaps around the anchor locker and I would think it would have a V shape also.
It’s not big enough to be of any use anywhere around the bow seating or windshield pass thru.
I was thinking a wrap around something? Cover for battery/oil injection area? I really think it’s origional due to the matching upholstery.
It has 4 FEMALE snaps on both sides. 4 up and four down as it lays flat. There was only one so I’m guessing it’s centerline or single use like dash cover?
Thanks fellas. At this point it’s more curiosity than a need. What a great boat!!
It’s not big enough to be of any use anywhere around the bow seating or windshield pass thru.
I was thinking a wrap around something? Cover for battery/oil injection area? I really think it’s origional due to the matching upholstery.
It has 4 FEMALE snaps on both sides. 4 up and four down as it lays flat. There was only one so I’m guessing it’s centerline or single use like dash cover?
Thanks fellas. At this point it’s more curiosity than a need. What a great boat!!
i could maybe see this thing as somehow wrapping around the bimini like a boot and holding it in a particular position against the windshield or maybe under the splashwell.
or maybe the previous owner found it floating in the ocean one day, put it in a locker and forgot about it.
or maybe the previous owner found it floating in the ocean one day, put it in a locker and forgot about it.
I have a long boot for my Bimini top and frame that keeps it rolled up (collapsed) when not in use but it is longer and is Zippered but that is a possibility
SkunkBoat
Well-Known Member
- Joined
- Oct 12, 2017
- Messages
- 4,508
- Reaction score
- 1,614
- Points
- 113
- Location
- Manasquan Inlet NJ
- Website
- www.youtube.com
- Model
- Express 265
Last owner was not sure about anything. I have the Bimini cover on. With the opposing straps it does seem to wrap around something.
On another note I have the full Bimini/canvas in pretty good shape that I may sell if someone wants it. I don’t think I will ever use it. It’s jut getting stored on the boat/storage. I hate to part with it but I’ll never use it. Thanks again.
On another note I have the full Bimini/canvas in pretty good shape that I may sell if someone wants it. I don’t think I will ever use it. It’s jut getting stored on the boat/storage. I hate to part with it but I’ll never use it. Thanks again.
The Bimini has two hooks just under the front splash well, that cover snaps between the front splash well to the deck to protect the Bimini while in those hooks.
I think you nailed it buddy. I will go look for the 8 snaps on the boat. I don’t remember them but I looks right on. Your transom is different but the concept is the same.
Parthery
GreatGrady Captain
As previously mentioned, it goes aft center and provides a level of coverage for the bimini when it's stowed underneath the motor well.
So yes, that IS what it is for. Problem is my boat has no snaps to receive it. If anyone out there wants this one I will give it away for the cost of shipping.
cheers, jim
253-732-3756
cheers, jim
253-732-3756