Need help sourcing a part

Slim grady

Slim grady

Well-Known Member
Joined
Oct 29, 2020
Messages
62
Reaction score
19
Points
8
Age
50
Location
New York
Model
Seafarer
Gentlemen I call upon you all for some help finding a part... I have a 1988 seafarer 226... On the port side gunnel wall I have a spout that turns out towards you, you press the button and fresh water comes out... I cracked the housing for it ( it's the flush part that the water spout sits in) do you guys happen to know where I can get a replacement? Thanks in advance .....tight lines!
 
Punchline Cap

Punchline Cap

GreatGrady Captain
Joined
Jan 16, 2021
Messages
140
Reaction score
43
Points
28
Age
67
Location
Sea Isle City NJ
Model
Fisherman 236
Slim grady said:
Gentlemen I call upon you all for some help finding a part... I have a 1988 seafarer 226... On the port side gunnel wall I have a spout that turns out towards you, you press the button and fresh water comes out... I cracked the housing for it ( it's the flush part that the water spout sits in) do you guys happen to know where I can get a replacement? Thanks in advance .....tight lines!
Click to expand...
Did a little research online and I found a 2007 parts catalog that has Seafarer parts in it.
On page 47 it has Part number 11-443 Faucet Cold Water listed. I don’t know if this part would transition back to 1988. Hope this is helpful. Good luck.
 
  • Like
Reactions: SmokyMtnGrady
Slim grady

Slim grady

Well-Known Member
Joined
Oct 29, 2020
Messages
62
Reaction score
19
Points
8
Age
50
Location
New York
Model
Seafarer
Punchline Cap

Punchline Cap

GreatGrady Captain
Joined
Jan 16, 2021
Messages
140
Reaction score
43
Points
28
Age
67
Location
Sea Isle City NJ
Model
Fisherman 236
  • Like
Reactions: Meanwhile
D

DennisG01

GreatGrady Captain
Joined
Sep 1, 2013
Messages
7,188
Reaction score
1,341
Points
113
Location
Allentown, PA & Friendship, ME
Model
Offshore
Slim, use the parts manual that the guys have been posting for you. In there (I checked, just to be sure) is the original part number for your faucet that you can use at your local Grady dealer. It might be tough, though, since there's a chance that it is no longer made given how old the boat is. In that case, you really just need to find something you like and "make it work". You can google for things like gunwale, gunnel, faucet, box, etc.
 
Last edited:
Legend

Legend

GreatGrady Captain
Joined
Jun 29, 2006
Messages
1,462
Reaction score
201
Points
63
Location
Southern New England
Model
Sailfish
Here is an old post from 2010 with info on where to source your water faucet. Finaddict Marine is the source.

New gunwale sink box, trim pieces and toe rails. (Pics)

I contacted finaddict marine and sent him a drawing of the faucet box located on the gunwale on the 95 Islander. The new one is fabricated from the original GW almond color. The ABS one was degraded, dry rotted and cracked. Notice the lack of fasteners on the face and I have an electric pump...
www.greatgrady.com www.greatgrady.com
 
Slim grady

Slim grady

Well-Known Member
Joined
Oct 29, 2020
Messages
62
Reaction score
19
Points
8
Age
50
Location
New York
Model
Seafarer
Legend said:
Here is an old post from 2010 with info on where to source your water faucet. Finaddict Marine is the source.

New gunwale sink box, trim pieces and toe rails. (Pics)

I contacted finaddict marine and sent him a drawing of the faucet box located on the gunwale on the 95 Islander. The new one is fabricated from the original GW almond color. The ABS one was degraded, dry rotted and cracked. Notice the lack of fasteners on the face and I have an electric pump...
www.greatgrady.com www.greatgrady.com
Click to expand...
Ty so much fellas!..... I really appreciate all they help this community has to offer! Ho ho ho fellas and right lines
 
You must log in or register to reply here.