I have removed all decals and pinstripe off my 2004 Marlin and looking to update it all. I am having trouble finding a roll of pinstripe. Anyone have any avenues?
Need to find new pinstripe for 2004 Marlin
- Thread starter Wally World
- Start date
Stephnic
Well-Known Member
- Joined
- Apr 24, 2017
- Messages
- 179
- Reaction score
- 53
- Points
- 28
- Location
- Somers Point NJ
- Model
- Islander
Call Taylor marine in Delaware. They are great people and will have anything you need shipped to your house.
I have been using them allot through their store on ebay and didn't see it on there. I will try and call them directly. Thank you
Most of the t stripping is the same stuff used for autos.
There are sites online.
Here is one I just googled. I have not used them
www.vinylstriping.com
West Marine also list some down to 1/4 inch width.
In any case, search the web.
There are sites online.
Here is one I just googled. I have not used them
3M Boat Striping Tape, Pinstriping Tape
Since 1984 we have provided you with the best value 3M Boat striping Tape and Pinstriping Tape. Order yours directly from Vinylstriping.com
West Marine also list some down to 1/4 inch width.
In any case, search the web.
ScottyCee
Well-Known Member
- Joined
- Feb 11, 2020
- Messages
- 456
- Reaction score
- 86
- Points
- 28
- Location
- Samish Island, WA
- Model
- Sailfish
Fishtales
Well-Known Member
- Joined
- Jan 31, 2005
- Messages
- 8,029
- Reaction score
- 1,286
- Points
- 113
If you are not picky you can get something right off the net. If you want to see all the different ones GW used over the years, go to your local dealer. Most sell it by the foot (expensive thought).
Once you know what you want, take a pic you can find it on the web.
Once you know what you want, take a pic you can find it on the web.
Use Hullstripes.com. Very helpful and can make multi-stripes in any color combination and widths. Tip I learned the hard way, was too cut down the large multi-stripes (i.e 2” or greater) into thinner sections to aide in applying around the curvature leading up towards the bow. Either you order two separate pieces or cut a full multi-stripe to suit. Good luck
ScottyCee
Well-Known Member
- Joined
- Feb 11, 2020
- Messages
- 456
- Reaction score
- 86
- Points
- 28
- Location
- Samish Island, WA
- Model
- Sailfish
I replaced a couple of sections, and I can honestly way that from more than about 10 feet away, you really don't see the splices. The color match was that good. I sent a couple of photos with a tape measure superimposed as well as filling out the order form. Very nice results. Hullstripes.com