New motor or say goodbye

Father's Day

Well-Known Member
Joined
Jun 24, 2020
Messages
221
Reaction score
63
Points
28
Age
59
Model
Tournament 192
Hello Everyone
Here's my question I have a 2000 tournament 192 with a 150 Merc on it. Motor running good have a little banging when it idles. It just loud and it smokes a little, I would like to put a new motor on it everyone's telling me I'm crazy just get a new used boat. I priced Yamahas about 14 15 grand. My thoughts are I have a new motor on a boat that I love , if I buy something else I'm buying another used boat with a used motor any thoughts would be appreciated.
Thanks
George
 
  • Like
Reactions: Fuzz and mmiela

PHG192

Member
Joined
Oct 1, 2020
Messages
5
Reaction score
2
Points
3
Age
52
Model
Freedom 205
I have the same boat, put the new engine on it and enjoy!
 
  • Like
Reactions: Fuzz

loubeer

GreatGrady Captain
Joined
Sep 6, 2017
Messages
210
Reaction score
76
Points
28
Location
Newport Beach, CA
Model
Express 330
I just repowered with two 250's - I'll swap you invoices :cool: . Seriously, I agree with above - if you plan to love your boat for another 10 years, go for it!
 

Ky Grady

GreatGrady Captain
Staff member
Joined
Mar 1, 2006
Messages
3,031
Reaction score
1,353
Points
113
Location
Berea, KY/Cross, SC
Model
Seafarer
Good decision! You may be in for a wait though. I'm repowering my 228 and been waiting on a new F250 since last September. I may see it by December of this year they say. I know my boat from top to bottom and I've pretty much redone it completely. It suits my needs well, so to me it's worth a repower.
 
  • Like
Reactions: Fuzz

MashpeeMan

Well-Known Member
Joined
May 2, 2017
Messages
115
Reaction score
30
Points
28
Location
Mashpee, MA
I also have the same boat (2001) and was thinking what I'd do if the motor starts to give me any issues at any point (I also have the 150 Yamaha, it's a 2 stroke DFI). My current motor runs like a top and only has about 350 hours so I'm hoping to run it for quite a while longer. But as things stand now I'd definitely lean toward keeping the boat and replacing the motor.
 

UCPA111

Well-Known Member
Joined
Jul 24, 2017
Messages
325
Reaction score
105
Points
43
Location
Erie, PA
If you're looking for payback justification....dollars...then you know the answer.
I repowered my 1984 Seafarer with a new Verado 300 with power steering and all the bells and whistles.

Was it worth it? YEP! Lots of smiles and good times on a boat I enjoy!
 
  • Like
Reactions: Fuzz

SmokyMtnGrady

Well-Known Member
Joined
Jul 11, 2009
Messages
2,020
Reaction score
505
Points
113
New motor and controls = New Boat ! I loved my 192 with that F150 on it. That boat hummed with that motor I tell you. Repower , you won't regret it!
 
  • Like
Reactions: Fuzz

Father's Day

Well-Known Member
Joined
Jun 24, 2020
Messages
221
Reaction score
63
Points
28
Age
59
Model
Tournament 192
Good decision! You may be in for a wait though. I'm repowering my 228 and been waiting on a new F250 since last September. I may see it by December of this year they say. I know my boat from top to bottom and I've pretty much redone it completely. It suits my needs well, so to me it's worth a repower.


Thanks yes there is a wait but i don;t mind
New motor and controls = New Boat ! I loved my 192 with that F150 on it. That boat hummed with that motor I tell you. Repower , you won't regret it!
Thanks good to hear someone else is all about the 192
 
  • Like
Reactions: Fuzz

seasick

Well-Known Member
Joined
Aug 19, 2008
Messages
9,563
Reaction score
1,434
Points
113
Location
NYC
I also have the same boat (2001) and was thinking what I'd do if the motor starts to give me any issues at any point (I also have the 150 Yamaha, it's a 2 stroke DFI). My current motor runs like a top and only has about 350 hours so I'm hoping to run it for quite a while longer. But as things stand now I'd definitely lean toward keeping the boat and replacing the motor.
How do you know how many hours the motor has on it?
 
Joined
May 1, 2021
Messages
6
Reaction score
2
Points
3
Age
59
Model
Weekender
I was going to ask the same question. I just found a new Yamaha F150 and put a deposit on it. Boat stuff is getting so scarce that I jumped on it and now I'm hoping that I made the right choice. My boat is an 87 Overnighter.

FYI - motor is $14k but with new controls gauges and labor it will cost me a little over $19k.
 
  • Like
Reactions: Fuzz

Doc Stressor

Well-Known Member
Joined
Nov 13, 2009
Messages
1,187
Reaction score
295
Points
83
Location
Homosassa, FL
Model
Seafarer
$5,000 for controls and rigging is way too high for an F150.

People thinking about re-powering should look into Tohatsu. Their prices include controls and rigging. All of their engines from 150 hp on up are rebadged Hondas. They are more available than most of the other brands and nobody can touch their prices. They seem to be aggressively going after Suzuki for leadership in the repower market.
 

luvsno

Member
Joined
Jan 29, 2006
Messages
20
Reaction score
1
Points
3
Location
mississauga
Well I’ll tell you in Canada the COVID prices make me want to sell my it but I can’t replace it. Easily double my money for my 1999 with a rebuilt 150 Yamaha Saltwater engine. We love it just don’t use it enough. But when we do it’s great. I vote new engine.
 
  • Like
Reactions: Fuzz

PointedRose

Well-Known Member
Joined
Feb 11, 2021
Messages
690
Reaction score
214
Points
43
Location
San Francisco
Model
Overnighter
I was going to ask the same question. I just found a new Yamaha F150 and put a deposit on it. Boat stuff is getting so scarce that I jumped on it and now I'm hoping that I made the right choice. My boat is an 87 Overnighter.

FYI - motor is $14k but with new controls gauges and labor it will cost me a little over $19k.
If you get the use, you made a great choice!
 
Joined
May 1, 2021
Messages
6
Reaction score
2
Points
3
Age
59
Model
Weekender
$5,000 for controls and rigging is way too high for an F150.

People thinking about re-powering should look into Tohatsu. Their prices include controls and rigging. All of their engines from 150 hp on up are rebadged Hondas. They are more available than most of the other brands and nobody can touch their prices. They seem to be aggressively going after Suzuki for leadership in the repower market.
Thanks. That's good info. The $5k in addition to the motor also includes labor.
 

Lt.Mike

Well-Known Member
Joined
Oct 18, 2013
Messages
879
Reaction score
165
Points
43
Age
64
Location
Farmingdale NJ
Model
Overnighter
If you want a bigger boat or a different style that’s fine but to sell yours for another used of the same ?
When someone sells a boat they sell it for a reason and a lot of people hold back on their reasons when your interested.
Is your boat solid in the stringers and transom?
One day the tank will need replacing but then it’s good for a lot of years after. If you repower it with a new engine it’s just that, a new engine. ;)
If you like your boat I’d say repower it, but go bigger like the 200F 4 cylinder Yamaha. Loads more fun ;)
 
  • Like
Reactions: Fuzz

Lt.Mike

Well-Known Member
Joined
Oct 18, 2013
Messages
879
Reaction score
165
Points
43
Age
64
Location
Farmingdale NJ
Model
Overnighter
I was going to ask the same question. I just found a new Yamaha F150 and put a deposit on it. Boat stuff is getting so scarce that I jumped on it and now I'm hoping that I made the right choice. My boat is an 87 Overnighter.

FYI - motor is $14k but with new controls gauges and labor it will cost me a little over $19k.
I have an ‘87 Overnighter too, only mine has a Suzuki DT225.
If the engine ever dies I’ll mount the F200 4cylinder on it.
I think you’ll do fine with the 150 though. Their great outboards.
 
  • Like
Reactions: Fuzz