Nylon Snap Fasteners for 306 Windshield .

loafer-roatan

Active Member
Joined
May 30, 2012
Messages
34
Reaction score
3
Points
8
Anyone know where I can buy the nylon grommets for the male part of the snap fastener for the Isenglass?
 

Attachments

  • 15593223119852679952490368204681.jpg
    15593223119852679952490368204681.jpg
    1.7 MB · Views: 48
  • 15593223308067583318660349855600.jpg
    15593223308067583318660349855600.jpg
    1.9 MB · Views: 47
I've never seen that fastener. Might want to either shoot GW Cust Service an email or see the dealer.
 
Anyone know where I can buy the nylon grommets for the male part of the snap fastener for the Isenglass?
I has same problem you had would not find snap grommets .so far did you find any yet?
 
any one know where I can buy the snap windshield rubber bushing for my Grady white 282 release.if yes I very appreciate it.
 
Never seen that fastener. Can you show us a pic of one in place on the windshield. FWIW, it looks like it pulled out because the snap was corroded together. If there are more, I would put a knife blade between the 2 halves, pop them apart, clean and lube remaining fasteners.
 
I did call Grady white dealer ,because old model of my boats they don't make snap anymore.thanks you
I would check with them again and ask them to find out who the manufacturer is. Start with that - to see if they're even still made - before you go hunting around. You could also contact Grady directly and ask them.
 
It's easy to make something work there, but it won't look the same. Take a male snap with a threaded stud on it, flat washer, regular nut inside the hole to keep it centered, flat washer on the other side, and a nyloc or cap nut.
Would still like to see a pic of a complete one.