Pantographic wiper arm question

Major Woods

Member
Joined
Jul 7, 2024
Messages
7
Reaction score
0
Points
1
Age
62
Model
Marlin
I am looking to upgrade the wipers on my 2004 GW Marlin 300 to Pantographic arms.
Have you done this, what brand did you change to?
If so, was the change good / bad / or no difference?

Thanks
 
I'm looking for the same information because I put tall narrow windows on my custom pilot house on my 228. West Marine has some, I'm still doing research.
 
Assuming you are installing new motors, arms , parts from Marinco probably would work.
This is a good place to start your research
 
If you know the make of the motors, you can research for compatible arms or at least get the specs for the shafts
 
If you know the make of the motors, you can research for compatible arms or at least get the specs for the shafts
I have a query in to Grady about them. I took the covers off but the label is facing the wrong way. I'll just wait until Grady gets back to me.
I think they are Marinco brand.
 
I was hoping to reuse the stock motors.
Annnnnnd, I'm an idiot. Those motors are not going to be strong enough to move the 24 inch arms I need. And the stock motors are not centered on my new windows. So far as I know, asking the motor to do 60% to the left and 40% to the right is not a thing. Which means this is a bigger project, new motors, new motor location, some fiberglass work to clean up the old holes.
 
My update.
Installed the Marinco pano arms and wiper blade, works great
 
question .... did you install the Marinco panto arms /blades on the original motors on your Marlin ??? picture or video ? Not sure but I think my 2007 Marlin has a different (larger) windshield. ????
 
Last edited:
Totally adjustable, large amount of adjustment can be made to match your need.
Attached wiper, activate system and made adjustment as needed, simpler than I thought it would be