Re-glassing Fuel-tank Hatch

SkunkBoat

Well-Known Member
Joined
Oct 12, 2017
Messages
4,508
Reaction score
1,614
Points
113
Location
Manasquan Inlet NJ
Website
www.youtube.com
Model
Express 265
a lot of real boats have hatches that don't screw down. they have drain channels formed in the deck that go to scuppers overboard. The core of the hatch is nowhere near the edge.

The pink foam works (with epoxy NOT polyester)as long as the bond is good. So does end grain balsa and vinyl honeycomb.
Having a strong core is a backup for bond failure.
 
  • Like
Reactions: Hookup1

Hookup1

GreatGrady Captain
Joined
Oct 16, 2007
Messages
3,035
Reaction score
855
Points
113
Age
70
Location
Cape May, NJ
Model
Islander
I want more shear strength in the core. I’m not taking any chances! Don’t want to have to do over.

Same logic I use with polyester vs epoxy. My time is worth more than the cost difference.
 

DennisG01

GreatGrady Captain
Joined
Sep 1, 2013
Messages
7,190
Reaction score
1,341
Points
113
Location
Allentown, PA & Friendship, ME
Model
Offshore
I want more shear strength in the core. I’m not taking any chances! Don’t want to have to do over.

Same logic I use with polyester vs epoxy. My time is worth more than the cost difference.
I hear 'ya. I posted my experience for information/reference/ and the "hmmmm" factor. I'm in no way "recommending" using foamboard to anyone else - I relaize it's not the norm. But it is quite interesting how well it's working. As I eluded to - on this hatch, I could rebuild it in just a couple hours so I wasn't worried about the time factor. But again - that's just me! :)
 

Hookup1

GreatGrady Captain
Joined
Oct 16, 2007
Messages
3,035
Reaction score
855
Points
113
Age
70
Location
Cape May, NJ
Model
Islander
I have a 1997 Islander. My factory bow pulpit is filled with some hard fill material. Feels like resin mixed with sand! In the photo ignore the repair and look at the block sitting on top with the other stuff that was removed. The soap bar sized chunk is a fill material the GW used. Heavy and feels like Corian or some other fake rock. Its actually the corner under the bang cap that broke off.

Star corner 1.jpeg
 

Hookup1

GreatGrady Captain
Joined
Oct 16, 2007
Messages
3,035
Reaction score
855
Points
113
Age
70
Location
Cape May, NJ
Model
Islander
GW probably outsources parts like pulpits, hatches and hardtops to different builders.