I’m thinking about replacing the cockpit floor drains on my 2003 330 express has anybody else done there’s ? I did my marlin and had to cut a section of the floor up to get to the ones on the starboard side. I haven’t crawled down in the bilge yet but looks like it may be possible to do it from the underside.
Replacing cockpit floor drains
- Thread starter ocdansar
- Start date
I'm considering the same. I believe if you remove the diesel tank and can crawl into a tight space, it can be done without cutting the deck. Port, I'm told, can be done by removing the batteries and battery/fuel selector panel. Neither side is easy it appears. I'd be happy to have you tell us how you do it! ha ha!
I think the port side looks to be pretty easy. I’ve got the boat tore apart right now. Mine has the gas generator so don’t have to pull the tank .
First day since thanksgiving back working on the boat . Decided to crawl down in the bilge and give it a whirl. I’m not gonna lie there was some blood shed but I got one out. I am fairly confident I can get the other one out. Both on starboard side. I looked at the port side and they are accessible.
laying on top of the generator and wiggle wiggle wiggle and finally got the hose off. I may try the other one tomorrow I will report back.
laying on top of the generator and wiggle wiggle wiggle and finally got the hose off. I may try the other one tomorrow I will report back.
Like to see what you replace them with. Are you using existing hoses or replacing all the way to the thru hulls? Able to reach the thru hulls?
Just replacing floor drains. I can’t reach the thru hulls on the starboard side. The hoses and clamps actually look and feel pretty good. The thru hulls on the side of the hull are SS.
I would like to find some in stainless but not having much luck. If anybody has a source post it up thanks.
I would like to find some in stainless but not having much luck. If anybody has a source post it up thanks.
I have these on watch list at Ebay. Might not be the right size, but I saved for future consideration: 90 Degree Mirrored Stainless Steel 1-1/2 Inch Boat Deck Drain Marine Plug Yacht
Fishtales
Well-Known Member
- Joined
- Jan 31, 2005
- Messages
- 8,029
- Reaction score
- 1,286
- Points
- 113
From a previous thread on the same topic....
This is the new model floor drain that Grady is now using. It has a built-in ball valve that is supposed to reduce the water back flow. They are a lot more rugged than the older plastic ones without the ball valve. You can also unscrew them for cleaning.
REMOVABLE COCKPIT DRAIN SCUPPER
Stainless Steel 316 Grate & Nylon Adapter
1. Spoke type drain grate designed to maximize water flow. 2. Stainless steel 316 grate screws into nylon body. 3. Inner grate can be removed for cleaning purposes. 4. Incorporates one way check ball to hold water back temporarily.
You can order them through a Grady dealer, but I'm trying to get them directly from the supplier since they are located only a few miles from me. I'll find out today (if they are open) or tomorrow and see if they will sell directly to retail customers.
MARINE TOWN USA
2061 NW US Highway 19,
Crystal River,FL 34428
T352 564 1150
F352 564 1156
E info@marinetown.com
This is the new model floor drain that Grady is now using. It has a built-in ball valve that is supposed to reduce the water back flow. They are a lot more rugged than the older plastic ones without the ball valve. You can also unscrew them for cleaning.
REMOVABLE COCKPIT DRAIN SCUPPER
Stainless Steel 316 Grate & Nylon Adapter
1. Spoke type drain grate designed to maximize water flow. 2. Stainless steel 316 grate screws into nylon body. 3. Inner grate can be removed for cleaning purposes. 4. Incorporates one way check ball to hold water back temporarily.
You can order them through a Grady dealer, but I'm trying to get them directly from the supplier since they are located only a few miles from me. I'll find out today (if they are open) or tomorrow and see if they will sell directly to retail customers.
MARINE TOWN USA
2061 NW US Highway 19,
Crystal River,FL 34428
T352 564 1150
F352 564 1156
E info@marinetown.com
From a previous thread on the same topic....
This is the new model floor drain that Grady is now using. It has a built-in ball valve that is supposed to reduce the water back flow. They are a lot more rugged than the older plastic ones without the ball valve. You can also unscrew them for cleaning.
REMOVABLE COCKPIT DRAIN SCUPPER
Stainless Steel 316 Grate & Nylon Adapter
1. Spoke type drain grate designed to maximize water flow. 2. Stainless steel 316 grate screws into nylon body. 3. Inner grate can be removed for cleaning purposes. 4. Incorporates one way check ball to hold water back temporarily.
You can order them through a Grady dealer, but I'm trying to get them directly from the supplier since they are located only a few miles from me. I'll find out today (if they are open) or tomorrow and see if they will sell directly to retail customers.
MARINE TOWN USA
2061 NW US Highway 19,
Crystal River,FL 34428
T352 564 1150
F352 564 1156
E info@marinetown.com
Think they wanted 40 per a drain, shipping of 15 or so plus a surplus charge for China.
I am picking 2 up from my local Grady dealer for 100, including tax.
- Joined
- Mar 1, 2006
- Messages
- 3,027
- Reaction score
- 1,351
- Points
- 113
- Location
- Berea, KY/Cross, SC
- Model
- Seafarer
- Joined
- Mar 1, 2006
- Messages
- 3,027
- Reaction score
- 1,351
- Points
- 113
- Location
- Berea, KY/Cross, SC
- Model
- Seafarer
This is the one from factory tour that got my attention. Ordered from dealer as soon as I got done with tour.
- Joined
- Mar 1, 2006
- Messages
- 3,027
- Reaction score
- 1,351
- Points
- 113
- Location
- Berea, KY/Cross, SC
- Model
- Seafarer
I have all 4 removed now. Really don’t want to go to dealer. Anybody have a link for some on line ? Thanks
SkunkBoat
Well-Known Member
- Joined
- Oct 12, 2017
- Messages
- 4,508
- Reaction score
- 1,614
- Points
- 113
- Location
- Manasquan Inlet NJ
- Website
- www.youtube.com
- Model
- Express 265
read thru this thread there are some pix and info about the deck drains that found and ones that I eventually used
https://www.greatgrady.com/threads/deck-drain-scupper-surprise.28979/
https://www.greatgrady.com/threads/deck-drain-scupper-surprise.28979/
I was hoping to do mine this weekend but weather isn’t going to cooperate...
Been meaning to ask, why did you do one hose 30 and the next 29? Wouldn’t you want as much hose as possible on the fittings?
teaklejr
Well-Known Member
- Joined
- Jun 25, 2006
- Messages
- 179
- Reaction score
- 45
- Points
- 28
This is something I want to do to our 305 Express, it bothers me that the little bar across each drain is not lined up from side to side just right. I know a stupid thing to let bother me. Why from the factory can they just not spend a few more minutes getting little things like that just right especially considering what they cost new. Am I the only crazy person who notices things like this?
Agree, I am the same way.
As an example, you would think a showroom boat would have a cleaner job on the cockpit drain than the one in KY Grady’s pics. The one he did looks professionally done and looks integrated with the floor vs the one that was done at the factory.
Fishtales
Well-Known Member
- Joined
- Jan 31, 2005
- Messages
- 8,029
- Reaction score
- 1,286
- Points
- 113
I was talking to a glass guy about this and he said the way he does it is to cut a hole in the hull above the thru hulls and get at them that way. He's done a bunch this way - I am a bit perplexed. That being said he says it's fiberglass and you can repair it easy enough. When done, you can't tell the difference.