Replacing Command link gauges Twin F150's

[Zumytunes]

Hello! I have a 2001 23' Gulfstream with twin F150's & I wanted to replace the Command link gauges, they are a little tired and some difficult to read.

A couple questions-

1- I found a few on E-bay but where is a good place to buy these square bezel guages? I need the 2 tachs and the 1 Speed/Fuel

2- I heard I need to program the new ones, is there a manual I could look at online you could reccomend? I dont have any manuals..

Any info is appreciated!

Thanks Justin

 

[family affair]

Word is there is a place in FL that will recondition these for a fraction of new. I'd go that route and save yourself a headache.

 

[Denko]

Another option to consider is the 6YC Information station. I had 4 CL gauges on my Gulfstream when I got it, the 6YC gave me enough room to mount a 7" MFD on a panel below it.

 

[seasick]

Home - GaugeSaver

Specializing in restoration of aged, sunburnt, or faded Liquid Crystal Displays. Current Turn-Around Time: 3-4 weeks, thanks for your patience Request Service We Service More Than Just Gauges Marine electronics, Chartplotters, VHF radios, Sounders, Engine Gauges, Personal WaterCraft clusters...

gaugesaver.com

 

[wspitler]

Go online and get the installation manual for the type of command link gauge that you have. There are several types. They are readily available!

 

[seasick]

I think that for that generation of tach and speedo , the config is done by small switches on the back of the gauges