Rod Rack Removal

Norcoastal

Well-Known Member
Joined
Apr 13, 2021
Messages
205
Reaction score
70
Points
28
Age
66
Does anyone know how to remove this teak rack?

I want to replace it with a new starboard one.

Thanks
 

Attachments

  • C8855944-0F43-4872-9A58-52FA03D4FD8B.jpeg
    C8855944-0F43-4872-9A58-52FA03D4FD8B.jpeg
    948.8 KB · Views: 40
  • F24AA25E-8095-46EF-8122-D697CCAA0AD1.jpeg
    F24AA25E-8095-46EF-8122-D697CCAA0AD1.jpeg
    1 MB · Views: 39

Mustang65fbk

Well-Known Member
Joined
Jun 4, 2020
Messages
2,577
Reaction score
682
Points
113
Age
38
Location
Seattle area
Model
Seafarer
I'm not positive but would have to assume if there isn't any exterior mounting hardware that it's probably attached with screws/hardware from the inside somehow, maybe accessed from underneath where the seats are?
 

Norcoastal

Well-Known Member
Joined
Apr 13, 2021
Messages
205
Reaction score
70
Points
28
Age
66
It’s a live well and there are 2 hoses attached to the liner. I could remove the two hoses but it’s tough getting you hand back there.
 

Mustang65fbk

Well-Known Member
Joined
Jun 4, 2020
Messages
2,577
Reaction score
682
Points
113
Age
38
Location
Seattle area
Model
Seafarer
Looks like an older 228 Seafarer, and yes as stated above... I'd try to put your hand with a flashlight and/or mirror behind there to see if you can see any mounting hardware for the rod rack.
 

wrxhoon

Well-Known Member
Joined
Apr 4, 2012
Messages
958
Reaction score
291
Points
63
Location
Sydney Australia
That's a very old boat so I will be guessing . On later models with the starboard you need to take out the livewell. When the livewell is out you will see the fixing screws .
 

dogdoc

Well-Known Member
Joined
Apr 23, 2019
Messages
367
Reaction score
79
Points
28
Age
70
Model
Marlin
Why does a company that overall makes such a great product do things like mount something that will wear out but be nearly impossible to remove!
 

SteveJB

Member
Joined
Apr 17, 2022
Messages
5
Reaction score
1
Points
3
Age
63
Model
Seafarer
After you remove the live well, you will see the screws that hold it on. I just refinished mine. The live well may be a bit difficult to get out due to the insulation falling off. I taped it up with duct tape before putting it back in.
 

Chessie246G

Well-Known Member
Joined
Oct 31, 2021
Messages
301
Reaction score
104
Points
43
Age
47
Location
Maryland
Model
Explorer
Livewell has to come out. Same setup as my Explorer. 8 mounting screws thru the backside.
 

glacierbaze

Well-Known Member
Joined
Jul 6, 2012
Messages
2,488
Reaction score
644
Points
113
Age
75
Location
Chapel Hill and Pine Knoll Shores, NC
Model
Seafarer
I think that if you have a GW, with a transom live well, you get used to removing it for routine chores, live well pump, bilge pump, through hull maintenance, etc..
If your insulation is brittle, or coming off, you might try spraying with something like Flex Seal.
 
Last edited:

Father's Day

Well-Known Member
Joined
Jun 24, 2020
Messages
215
Reaction score
62
Points
28
Age
59
Model
Tournament 192
Does anyone know how to remove this teak rack?

I want to replace it with a new starboard one.

Thanks
Maybe its just me, but with the boat all gussied up that teak will pop. Just my opinion