I have a slow draining scupper. I force waster down from my hose. Tried the rubber thru hull stopper seems to be ok.
All other scuppers work fine, any ideas?
All other scuppers work fine, any ideas?
Scupper drain
- Thread starter Karen Ann IV
- Start date
Is this a "new" issue? If so, something is blocking it. Lift the flapper and look inside.
I'm sure what you mean by "Tried the rubber thru hull stopper seems to be ok". Did you put some type of rubber stopper into the drain?
I'm sure what you mean by "Tried the rubber thru hull stopper seems to be ok". Did you put some type of rubber stopper into the drain?
Lift the flapper and put the hose nozzle in from the outside.
Scupper hoses clog all the time. It is also possible that a hose is worn and either has a deteriated inside or a kink.
Make sure the flapper does not stick. If you have a slow drain and water is puddling, lift the flap on the outside and see if water gushes our or drains slowly. If it gushes, the flapper valve is sticking or just too stiff. If water drians slowly, something is clogged or restricting flow.
Scupper hoses clog all the time. It is also possible that a hose is worn and either has a deteriated inside or a kink.
Make sure the flapper does not stick. If you have a slow drain and water is puddling, lift the flap on the outside and see if water gushes our or drains slowly. If it gushes, the flapper valve is sticking or just too stiff. If water drians slowly, something is clogged or restricting flow.
Mustang65fbk
Well-Known Member
- Joined
- Jun 4, 2020
- Messages
- 2,577
- Reaction score
- 682
- Points
- 113
- Age
- 38
- Location
- Seattle area
- Model
- Seafarer
I'm assuming what she meant by that was that she lifted up the rubber flapper and it was still slow at draining? But I could be wrong. I always recommend that anyone buy a cheap borescope for things like this. This one is less than $30 on Amazon, it connects to your phone and could very quickly tell you if you've got some sort of blockage or something else in there. It also works great for working on cars or any other maintenance areas where it's difficult or impossible to see.
SkunkBoat
Well-Known Member
- Joined
- Oct 12, 2017
- Messages
- 4,508
- Reaction score
- 1,614
- Points
- 113
- Location
- Manasquan Inlet NJ
- Website
- www.youtube.com
- Model
- Express 265
I just got that one. same brand but 11ft version. Works pretty good.
Check to see that your drain hose is all downhill, from the scupper to the through hull. You may have a belly in the hose, which fills up with standing water, and slows the drain.