Scupper screen to prevent clogs?

pda

Member
Joined
May 29, 2019
Messages
15
Reaction score
0
Points
1
Location
PNW
Model
Freedom 205
Freedom 205, 2016

I seem to get clogs in my scupper tubes about 4 times a season. It is a pain to keep these clean and feels like a safety issue. We seem to be getting clogged with dog hair, pine needles, and fishing stuff.

Is there any sort of screen or filter I can attach on these to prevent the clogging?
 

Attachments

  • IMG_1487.jpeg
    IMG_1487.jpeg
    173.5 KB · Views: 29

seasick

Well-Known Member
Joined
Aug 19, 2008
Messages
9,529
Reaction score
1,420
Points
113
Location
NYC
All that does is cause the crap to pile up on the screen. At least without screens some stuff like leaves can pass through the scuppers. When you hose off the deck, every so often put the nozzle up against the drain and flush the scupper. This is true for all the drains, deck, lockers and cabin, not just transom.
 

PointedRose

Well-Known Member
Joined
Feb 11, 2021
Messages
679
Reaction score
212
Points
43
Location
San Francisco
Model
Overnighter
I have these on my sailboat scupper drains (interior side) but have not seen on motor boats (for the reasons seasick mentioned)

 

Fowl Hooked

Well-Known Member
Joined
Jun 4, 2007
Messages
214
Reaction score
58
Points
28
Location
Southern Maryland
Model
Express 265
My deck drains also get clogged up. In addition to the aforementioned blast em with the hose method, I carry a length of 3/8" flexible plastic tubing that bends with the curves of the drains but is rigid enough to work like a pipe cleaner for those really stubborn clogs.
 
  • Like
Reactions: Angler Management

pda

Member
Joined
May 29, 2019
Messages
15
Reaction score
0
Points
1
Location
PNW
Model
Freedom 205
Thank you everyone, I'll report back with what I decide on!
 

Sdfish

Well-Known Member
Joined
Sep 15, 2013
Messages
506
Reaction score
174
Points
43
Location
San Diego, California
Model
Adventure
I actually had screens built in on the scuppers drains I used, I ended up removing them with a dremel. It really slows the flow of water out of the boat. Agree with others above, just blast the hose thru them before / after each run.
 
  • Like
Reactions: Angler Management