SeaV2 hull performance

SmokyMtnGrady

Well-Known Member
Joined
Jul 11, 2009
Messages
2,020
Reaction score
504
Points
113
I have been a Grady owner now for going on 15 years. I bought Grady because my brother owned one and I rented a number of center console boats in the Keys and everyone of them were wet rides. I use to get bothered reading critical stuff on THT when it came to the brand. Like I made a bad boat choice or something.

I was reading recently different threads there on dead rise and folks in deep V boats swore by them. Some mentioned Grady and getting beat on them. This past week I got to spend a few days fishing in the deep blue sea. Seas were 2-3 not a lot wind driven chop. Sunday was a bit snotty with wind stuff and coming back to port I was getting my crew wet initially. Then I adjusted my tabs and motor trim and the hull performed well.

I started to think about criticism on THT and if you run a SeaV2 hull in choppy seas without tabs (on smaller boats for sure) then you really can't take advantage of the hull's design at all and you will get pounded and a little wet too.

My 192 did not have tabs and I noticed in some seas I would get wet and pounded. Anyway, the tabs to me make all the difference in how that hull works or not works well in a given sea . If folks dont have them or understand how to use them, then they in my experience are not getting the full benefit of seav2 design.
 

ElyseM

GreatGrady Captain
Joined
Nov 18, 2007
Messages
949
Reaction score
54
Points
28
Location
highlands, nj
don't disagree. and if you ever get the chance, ask the deep v, balls out, guys how they like their hulls on a drift or slow troll. let me know what they say :mrgreen: ron