Sending Unit for Tournament 192

hardasset

Active Member
Joined
Mar 12, 2018
Messages
35
Reaction score
2
Points
8
I need to replace the fuel sending unit on my 2002 192 Tournament. I am going to go with a Wema sending unit. Has anyone replaced theirs on a 192 Tournament and if so, can you tell me the correct length or a part number? Many thanks.
 

Parthery

GreatGrady Captain
Joined
Jan 31, 2005
Messages
2,589
Reaction score
220
Points
63
Location
Atlanta, GA
Call GW customer service and they will tell you the depth of the tank. Subtract 1/2" and order your sender from WEMA to that length.

252-752-2111
 

hardasset

Active Member
Joined
Mar 12, 2018
Messages
35
Reaction score
2
Points
8
Thanks! Customer service was very helpful. For future reference, the 2002 192 Tournament takes a 9 inch Wema Sending Unit, Wema part number sss-9 151330-9
 
  • Like
Reactions: tech_dog

seasick

Well-Known Member
Joined
Aug 19, 2008
Messages
9,563
Reaction score
1,434
Points
113
Location
NYC
Thanks! Customer service was very helpful. For future reference, the 2002 192 Tournament takes a 9 inch Wema Sending Unit, Wema part number sss-9 151330-9
Do me a favor please. When you pull the old unit, measure from the flange to the tank bottom. I usually subtract an inch for the sender length and am curious what Grady did.

Thanks
 

Willy-C

Well-Known Member
Joined
Nov 5, 2012
Messages
189
Reaction score
66
Points
28
Age
68
Location
Hooksett, NH
Just for reference, my 1992 190 Tournament has a factory gas tank of exactly 9.50” depth at the sender port. My local Grady dealer sold me a 8” a few years ago, but would’ve been happier with a 9”
 

seasick

Well-Known Member
Joined
Aug 19, 2008
Messages
9,563
Reaction score
1,434
Points
113
Location
NYC
My understanding is that the guideline is 1 inch shorter than the depth. I believe that is WEMA's recommendation. The senders come in whole inches so I see what they sold you an 8. It really doesn't matter very much. It just means that in theory, when your gauge reads empty, you have a bit more gas left than if you had a 9 inch sender.
In a really hypothetical model of an 80 gallon tank that is flat sided and flat bottomed and that when full makes the sender read full, each inch of gas depth represents about 8.4 gallons. So in your case the sender reads empty when there is still 1.5 inches of fuel left or about 12.6 gallons. If you had the 9 inch model, empty would mean about 4.2 gallons left. Of course this is not a realistic model if you tank is slopped on the bottom or sides but regardless, I would rather have 12 gallons of gas left when the gauge reads empty as opposed to 4 or so. As long as you have a feel for what the readings mean, the length is super critical One other advantage to the shorter sender is that there is less chance of it sucking up gunk or garbage that has settled on the bottom.
 

tech_dog

Well-Known Member
Joined
Nov 19, 2021
Messages
61
Reaction score
10
Points
8
Model
Tournament 192
I've had 8" and 9" senders in my 96 192, and I think the 9" gives better information. I did a fill test and the 9" sender was still reading empty when the tank had 10 gallons.

Using the math above, the 8" would bump the empty reading to about 20 gallons, or a third of a tank. That's in-line with what I saw with the 8", and that's why I switched back to 9".
 

Father's Day

Well-Known Member
Joined
Jun 24, 2020
Messages
221
Reaction score
63
Points
28
Age
59
Model
Tournament 192
I need to replace the fuel sending unit on my 2002 192 Tournament. I am going to go with a Wema sending unit. Has anyone replaced theirs on a 192 Tournament and if so, can you tell me the correct length or a part number? Many thanks.
I went with a KUS USA Fuel and water sensor 9 inch 4 years ago and no issues at all
 

luvsno

Member
Joined
Jan 29, 2006
Messages
20
Reaction score
1
Points
3
Location
mississauga
Good Morning, where did you order the sending unit from. I'm in Canada but no one seems to carry it. Any outfitters I see want stupid money to ship into Canada.
One place was $42.40 and $140 fuel surcharge. I often have things shipped to Buffalo and make a day trip for wings and pick the stuff up. Thanks
 

DennisG01

GreatGrady Captain
Joined
Sep 1, 2013
Messages
7,227
Reaction score
1,354
Points
113
Location
Allentown, PA & Friendship, ME
Model
Offshore
Good Morning, where did you order the sending unit from. I'm in Canada but no one seems to carry it. Any outfitters I see want stupid money to ship into Canada.
One place was $42.40 and $140 fuel surcharge. I often have things shipped to Buffalo and make a day trip for wings and pick the stuff up. Thanks
Try contacting KUS and ask them if there's a retailer in Canada. Or check with your local marina or marine store - that, I think, should alleviate the shipping issue.
 

tech_dog

Well-Known Member
Joined
Nov 19, 2021
Messages
61
Reaction score
10
Points
8
Model
Tournament 192

Father's Day

Well-Known Member
Joined
Jun 24, 2020
Messages
221
Reaction score
63
Points
28
Age
59
Model
Tournament 192
Good Morning, where did you order the sending unit from. I'm in Canada but no one seems to carry it. Any outfitters I see want stupid money to ship into Canada.
One place was $42.40 and $140 fuel surcharge. I often have things shipped to Buffalo and make a day trip for wings and pick the stuff up. Thanks
Amazon, we have family in Canada and often send things there so should be no problem for you. I replaced mine 4 yrs ago with Kus USA SSS Fuel & Water Level Sensor 9 inch $55
 
Last edited:

Father's Day

Well-Known Member
Joined
Jun 24, 2020
Messages
221
Reaction score
63
Points
28
Age
59
Model
Tournament 192
Amazon, we have family in Canada and often send things there so should be no problem for you. I replaced mine 4 yrs ago with Kus USA SSS Fuel & Water Level Sensor 9 inch $55
Amazon, we have family in Canada and often send things there so should be no problem for you. I replaced mine 4 yrs ago with Kus USA SSS Fuel & Water Level Sensor 9 inch $55
I just acted like I was sending it my family in Canada shipping was $9.95
 

Hey Doc

Member
Joined
Apr 8, 2020
Messages
9
Reaction score
1
Points
3
Age
63
Model
Explorer
I replaced the unit in my 242 and had a lot of trouble. Ordered the Grady recommended USA unit, but the one I got was mis labeled a European unit. The dealer did make it right after proving that I tested it properly. I noticed the other day that Sea Star ( I think the brand) sells a universal unit that you cut to length. It was on the shelf at a dealers shop. Good luck, hope you get the right one the first time.
 

SkunkBoat

Well-Known Member
Joined
Oct 12, 2017
Messages
4,521
Reaction score
1,619
Points
113
Location
Manasquan Inlet NJ
Website
www.youtube.com
Model
Express 265
The sender has to have some clearance from its pickup to the tank bottom. Therefore it will always read empty when there is some gas in the tank.
What gas gauge do you have. The command ling gauges don't exactly tell you when the tank is empty especially if you have a rod type sender and not a swing arm type.
Finally, the angle of the hull in the water make a big difference in what level the sender reads. As the stern tilts deeper or he bow tips up, the reading can differ from actual by quite a lot.
I look at the gauge reading as a suggestion:). It is better to learn what yours reads under different situation and also be aware of your typical burn rates
pickup?
 

seasick

Well-Known Member
Joined
Aug 19, 2008
Messages
9,563
Reaction score
1,434
Points
113
Location
NYC
At least I know that my posts are read. Did I say pickup??? Oops.
 
  • Like
Reactions: SkunkBoat