Shore Power

TJR

Member
Joined
Apr 8, 2010
Messages
6
Reaction score
0
Points
0
I recently purchased a 2002 Sailfish 282. The first time I plugged it in, everthing worked except the outlets. Now when I plug it in nothing works. The green light on the main panel does not go on when I switch it to the on position. Where do you begin to fix this problem?
 

Gman25

GreatGrady Captain
Joined
Feb 25, 2005
Messages
808
Reaction score
4
Points
18
Location
Bayshore, NY
If your not getting the green light that says power available at the panal, the first thing I would check is the breaker at the dock. Not sure where it is on the Sailfish but there is a breaker switch under the gunnell near the shore power outlet on my Marlin. I would check that too. When you get power to the panal make sure the outlet switch is on the on position then remember the outlets are GFI type meaning there are two little buttons on the outlet one black one red. You may have to reset the outlets pressing the black first then the red.
 

sluggoe

Well-Known Member
Joined
Jul 7, 2009
Messages
151
Reaction score
1
Points
16
i have this boat;
u need to first check that the breaker is on at dockside power receptacle;
then turn the breaker on that is under the gunnel in your boat;
green should glow indicating cord is plugged in inside the cabin;
then turn ac main to on inside the cabin;
then turn whatever item u want to on like outlets, battery charger, etc.
--slugg
 

Legend

GreatGrady Captain
Joined
Jun 29, 2006
Messages
1,462
Reaction score
201
Points
63
Location
Southern New England
Model
Sailfish
You said that the outlets did not work the first time - once you get the green light per the first 2 replies you need to check the GFI outlet in the bathroom - the cabin outlets are linked to it on my boat - so if it is tripped the other outlets will not function
 

ahill

Well-Known Member
Joined
Jun 13, 2006
Messages
806
Reaction score
2
Points
0
Location
Manatee Pocket, FL
When you exit shorepower turn off any active 120 v appliances then panel breakers then panel main then under gunwale then dock power.
 

TJR

Member
Joined
Apr 8, 2010
Messages
6
Reaction score
0
Points
0
Thanks everybody. That did the trick. Everything works!