Anyone know who supplied the windows for the cabin sides to GW back in '93? I pulled mine out for resealing and would like to get new weatherstripping for them. Figured I could try the manufacturer before getting raped at the dealer....
Side window manufacturer?
- Thread starter gw204
- Start date
Hookup1
GreatGrady Captain
- Joined
- Oct 16, 2007
- Messages
- 3,035
- Reaction score
- 855
- Points
- 113
- Age
- 70
- Location
- Cape May, NJ
- Model
- Islander
Window weatherstrip
Try Water Bonnett. They made the windshield. Unfortunatly they didn't want to deal directly with a consumer even when GW customer service directed me to them.
I would check with a dealer first. At least you'll get the right stuff.
Try Water Bonnett. They made the windshield. Unfortunatly they didn't want to deal directly with a consumer even when GW customer service directed me to them.
I would check with a dealer first. At least you'll get the right stuff.
Legend
GreatGrady Captain
- Joined
- Jun 29, 2006
- Messages
- 1,462
- Reaction score
- 201
- Points
- 63
- Location
- Southern New England
- Model
- Sailfish
If you talking about the side window that opens and is held in place by plastic arm, there is a supplier located in Florida. A friend of mine recently got one for a 1985 22 foot Seafarer. It was around 50 bucks. He got the name from a GW dealer.
Check out this post http://www.greatgrady.com/forum/viewtop ... ht=#38984y I purchased my replacement window moulding etc. from them. It's all the same parts that were on the boat from '83. Went together well. Their service was pretty good.
Windows
The windows in my 98 208 are made by Lewmar. If that's not true in your case, then stop reading. However, I called Lewmar to find out where I could get the rubber molding strip that seals the window once the window is latched shut. Here's the name for the molding company:
Selected Plastics
Phone:
(203) 866-3767
Hope this is what you needed.
The windows in my 98 208 are made by Lewmar. If that's not true in your case, then stop reading. However, I called Lewmar to find out where I could get the rubber molding strip that seals the window once the window is latched shut. Here's the name for the molding company:
Selected Plastics
Phone:
(203) 866-3767
Hope this is what you needed.