Skene Bow Chocks

SeanC

Well-Known Member
Joined
Jun 16, 2015
Messages
358
Reaction score
216
Points
43
Location
Brisbane, Australia
Model
Seafarer
If you have a bow pulpit, do you use your Skene Bow Chocks? They are about AUD$90 a pair. I'm not sure I would use them.
Skene Bow Chock.JPG
 

PointedRose

Well-Known Member
Joined
Feb 11, 2021
Messages
679
Reaction score
212
Points
43
Location
San Francisco
Model
Overnighter
Try perko brand. Shouldn’t be that expensive, your price seems high. might be a larger size than you’d need.
 

SeanC

Well-Known Member
Joined
Jun 16, 2015
Messages
358
Reaction score
216
Points
43
Location
Brisbane, Australia
Model
Seafarer
I added them to my 330 Express because otherwise the rode ran right over a pretty sharp edge. Later model years added them from the factory. I also considered adding a cleat on the pulpit which might have been a better option.

Here's what I used: https://www.defender.com/product.jsp?id=4500213 (4.5")
I am going to add a cleat for the anchor rope. The 232 has one factory fitted but not the 228.
 

wrxhoon

Well-Known Member
Joined
Apr 4, 2012
Messages
958
Reaction score
291
Points
63
Location
Sydney Australia
First pic my old 228, she is for sale now. He is asking big money for a 23 YO boat .
6rsnbmboooi69zd52169nfuz4(1).jpg

Bottom pic , my current 228.

GW 228.JPG
 
  • Like
Reactions: PointedRose

Scottpaymn

New Member
Joined
Jan 30, 2020
Messages
1
Reaction score
0
Points
1
Age
48
Model
Sailfish

wrxhoon

Well-Known Member
Joined
Apr 4, 2012
Messages
958
Reaction score
291
Points
63
Location
Sydney Australia
Is that the 98 Bimini top for $91,990? Good luck with that.
Not my boat, I wish him luck as well.

I will add that the boat looked more like a 5 yo when I sold her rather than 23 and she was fitted with a new engine when I bought her .
Still $90k is a lot of coin for a 23 YO boat.
 

Squid1962

Well-Known Member
Joined
Jan 5, 2021
Messages
160
Reaction score
24
Points
18
Location
South Coast MA
Model
Express 330
What do you use the Alene cleats for on a 330? They seem to be in an odd place
 

drbatts

Well-Known Member
Joined
Nov 30, 2008
Messages
887
Reaction score
190
Points
43
Location
CT
Model
Express 305
I use them all the time when I anchor my 305. The rode goes through it then gets tied off on the starboard bow cleat.
 

Squid1962

Well-Known Member
Joined
Jan 5, 2021
Messages
160
Reaction score
24
Points
18
Location
South Coast MA
Model
Express 330
So I am guessing you use them to take the tension off the capsten/anchor hauler?
 

DennisG01

GreatGrady Captain
Joined
Sep 1, 2013
Messages
7,187
Reaction score
1,341
Points
113
Location
Allentown, PA & Friendship, ME
Model
Offshore
So I am guessing you use them to take the tension off the capsten/anchor hauler?
Skene chocks are used to divert the line away from things that may chafe the line and/or non-structural things like nav lights, etc.

A windlass' primary use is for lifting/lowering the anchor. In light conditions, it's fine to use the windlass to hold the boat. But otherwise, the line should always be brought to a cleat. Depending on the setup, there may be a cleat next to the windlass so the line can continue to be brought in through the anchor roller. Otherwise, the line should be brought around and through skene chocks to a bit/cleat (or directly to a side-mounted cleat.
 
  • Like
Reactions: Peter A