Recoil Rob
Well-Known Member
- Joined
- Mar 23, 2019
- Messages
- 295
- Reaction score
- 55
- Points
- 28
- Age
- 69
- Location
- CT Coast
- Model
- Sportsman
I'll primarily use it in close quarters, especially when backing up, easier to turn with one hand.
suicide knob / power knob for steering whel
- Thread starter Low Maintenance
- Start date
SkunkBoat
Well-Known Member
- Joined
- Oct 12, 2017
- Messages
- 4,509
- Reaction score
- 1,614
- Points
- 113
- Location
- Manasquan Inlet NJ
- Website
- www.youtube.com
- Model
- Express 265
That seems to be the consensus. But I just can't fork out $100 on a knob...don't get me wrong , I can spend stupid money on lots of things...but that knob...just can't do it.... been looking at that for years. Bought the cheap one- didn't work. I have a big destroyer style wheel.
Maybe someday switch to a smaller 3 spoke wheel with a knob and add power steering
It took me some time to do it, as well. But I can say that it is WELL built - it's amazingly heavy for how small it is. SUPER smooth, too. Customer service is great, as well. My brother removed it for some reason, then put it back on but didn't tighten it up enough. When I got to the boat it was laying on the floor and part of the insides were nowhere to be found (I assume washed out through the scuppers after a rain). I called Edson to buy new "guts"... they sent them for free even though I told them it was completely our fault.
Keeldad
Well-Known Member
- Joined
- May 13, 2018
- Messages
- 85
- Reaction score
- 41
- Points
- 28
- Age
- 67
- Location
- Ocean City, NJ
- Model
- Seafarer
The Edson is worth the price. It will also occasionally remind you that it is there as well ( at least on the Seafarer).
I just bought the Edson knob for my 330 Xpress. I have one on my old cc and it has been great for 15 years. The real deal. Just feel the weight and quality. Well worth the $$
Recoil Rob
Well-Known Member
- Joined
- Mar 23, 2019
- Messages
- 295
- Reaction score
- 55
- Points
- 28
- Age
- 69
- Location
- CT Coast
- Model
- Sportsman
Well maybe a destroyer wheel with and Edison in the future, right now I have other things to spend that cash on.
This looks like it will be a decent work around, I pulled my existing wheel and a hole drilled in one of the spokes will mount the knob.
One more question, when I puled the wheel the shaft key is a slightly corroded, should I just brush it off or make the effort to remove it cleanly and replace it with a stainless one? Are stainless keys even available?
thanks,
Rob
This looks like it will be a decent work around, I pulled my existing wheel and a hole drilled in one of the spokes will mount the knob.
One more question, when I puled the wheel the shaft key is a slightly corroded, should I just brush it off or make the effort to remove it cleanly and replace it with a stainless one? Are stainless keys even available?
thanks,
Rob