Trailer brakes

Saltyone

Well-Known Member
Joined
Jul 13, 2018
Messages
292
Reaction score
85
Points
28
Location
St Helens, OR
Model
Express 265
I know it's a lot to ask, but don't hype up or lie when trying to sell something. "The trailer was just serviced" he said! Or maybe his idea of being "serviced" is pumping grease into the axles. 3 of the 4 brakes had NO inner pad. The one remaining inside pad and all the outside ones were just a backing plate!

Well at least I know what I've got now.20230521_134342.jpg20230521_133549.jpg20230601_201405.jpg
 

seasick

Well-Known Member
Joined
Aug 19, 2008
Messages
9,531
Reaction score
1,420
Points
113
Location
NYC
Did you look at the trailer before buying it? Did you ask what was recently serviced?
Let the buyer beware.
 

Saltyone

Well-Known Member
Joined
Jul 13, 2018
Messages
292
Reaction score
85
Points
28
Location
St Helens, OR
Model
Express 265
I looked at it as much as I could.

As I mentioned in the 1st post, he said the trailer was just serviced. I didn't ask, he just told me that.

I take full responsibility for not being as thorough looking at the trailer after he said that. I also guess I shouldn't be surprised, considering how little he maintained the rest of the boat.
 

Mustang65fbk

Well-Known Member
Joined
Jun 4, 2020
Messages
2,577
Reaction score
682
Points
113
Age
38
Location
Seattle area
Model
Seafarer
Damn... that's pretty gnarly looking, and we don't even get a ton of rust up here in the PNW with regards to trailers, brakes, vehicles and so forth. Looks like those babies haven't been swapped out in 5-10 years at a minimum. Glad to hear you made it safely where you needed to go when buying the boat and that you didn't have any safety issues. A properly setup trailer can make all the difference between a life or death scenario when trying to stop.
 

Saltyone

Well-Known Member
Joined
Jul 13, 2018
Messages
292
Reaction score
85
Points
28
Location
St Helens, OR
Model
Express 265
Damn... that's pretty gnarly looking, and we don't even get a ton of rust up here in the PNW with regards to trailers, brakes, vehicles and so forth. Looks like those babies haven't been swapped out in 5-10 years at a minimum. Glad to hear you made it safely where you needed to go when buying the boat and that you didn't have any safety issues. A properly setup trailer can make all the difference between a life or death scenario when trying to stop.
He lived like 4 blocks from the marina, so I'm sure it was drop the boat in the spring, park the trailer till the fall when he picks up the boat. Probably never washed down the brakes after splashing the trailer twice a year.
 
  • Like
Reactions: Mustang65fbk

Beyond A Wake

Well-Known Member
Joined
Jan 23, 2022
Messages
238
Reaction score
43
Points
28
Age
73
Model
Freedom 335
How about the brake controller???? The rest of the trailer Suspension/axle sleeve seemed pretty rusted as well, how was the frame or is it aluminum?
Buyers beware is good advice.
H
 

Saltyone

Well-Known Member
Joined
Jul 13, 2018
Messages
292
Reaction score
85
Points
28
Location
St Helens, OR
Model
Express 265
How about the brake controller???? The rest of the trailer Suspension/axle sleeve seemed pretty rusted as well, how was the frame or is it aluminum?
Buyers beware is good advice.
H
It's an aluminum trailer. The surge brake coupler seems in good shape, though it's on the list to switch to EOH in the near future.

Got the brakes bleed this weekend and took it for a good test drive, all seems to be working well.
 
  • Like
Reactions: Meanwhile

Ekea

Well-Known Member
Joined
Aug 11, 2020
Messages
634
Reaction score
214
Points
43
Age
39
Location
Mid Atlantic
Model
Chase
my trailer that was "serviced and road worthy" when i bought it had an empty actuator, empty lines, water in one caliper, and two empty calipers.

after a couple hours of work, she stops beautifully now
 

Saltyone

Well-Known Member
Joined
Jul 13, 2018
Messages
292
Reaction score
85
Points
28
Location
St Helens, OR
Model
Express 265
my trailer that was "serviced and road worthy" when i bought it had an empty actuator, empty lines, water in one caliper, and two empty calipers.

after a couple hours of work, she stops beautifully now
Yep, sounds like mine.