In recently purchased an Airmar chirp LHW 275 transom mount and trying to figure out the best mounting location for a 2007 Grady White Express, any help would be greatly appreciated.
Transom Mount Transducer Placement 2007 330 Grady White Express
- Thread starter Cmiller32
- Start date
I did this on my 2006 330 Express. I mounted mine close to the keel. Getting the height right is important (bottom of transducer relative to the bottom of the keel). The Manufacturer can advise you best on this. I can text you photos if you PM me your #.
As to why a transom mount? I upgraded from a very basic unit to a much better transom mount so the install was relatively easy for me. I also prefer as few holes in the bottom of my boat as possible. That said - when I do a full upgrade, I'll go with a traditional, big boat, transducer.
As to why a transom mount? I upgraded from a very basic unit to a much better transom mount so the install was relatively easy for me. I also prefer as few holes in the bottom of my boat as possible. That said - when I do a full upgrade, I'll go with a traditional, big boat, transducer.
SkunkBoat
Well-Known Member
- Joined
- Oct 12, 2017
- Messages
- 4,524
- Reaction score
- 1,620
- Points
- 113
- Location
- Manasquan Inlet NJ
- Website
- www.youtube.com
- Model
- Express 265
On my 265 Express I put the transom mount between the motors. I used a Stern Pad brand mounting block from Amazon. Thumbs Up!