Transom Rebuild - The Saga Begins

Fishtales

Well-Known Member
Joined
Jan 31, 2005
Messages
8,019
Reaction score
1,284
Points
113
Hi,
Still in the queue (not happy about that). I made some noise to get the process going. Bang plate was removed and the joint actually looks pretty good.
I didn't have to sign anything yet and GW is in the loop. Will keep folks posted.
 

mr_mbuna

Well-Known Member
Joined
May 7, 2017
Messages
131
Reaction score
60
Points
28
Do you have a photo of your joint? Here's what mine looked like. I had no bulging around the cap, just lots of corrosion.

IMG_20210320_111930.jpg
 
  • Like
Reactions: atlgrady

Sdfish

Well-Known Member
Joined
Sep 15, 2013
Messages
506
Reaction score
174
Points
43
Location
San Diego, California
Model
Adventure
Just wanted to add the pics from my transom cap before and after. We could start to gather a pretty good data set on this to help others.

There was a noticeable bulge on mine, it may look like they over tightened the engine bracket. Not sure.

I just used thickened epoxy to cover the gap and then used a stainless bang plate to finish it up.
 

Attachments

  • transom after.JPG
    transom after.JPG
    1,018.4 KB · Views: 146
  • transom before.JPG
    transom before.JPG
    1.5 MB · Views: 146
Last edited:

Pat Hurley

Well-Known Member
Joined
Apr 22, 2020
Messages
247
Reaction score
112
Points
43
Age
66
Location
OCMD
Model
Marlin
Do you have a photo of your joint? Here's what mine looked like. I had no bulging around the cap, just lots of corrosion.

View attachment 19858
That’s a good sign (no bulging). Did you put a meter on it ? You gonna glass it or just replace the aluminum?
 

mr_mbuna

Well-Known Member
Joined
May 7, 2017
Messages
131
Reaction score
60
Points
28
That’s a good sign (no bulging). Did you put a meter on it ? You gonna glass it or just replace the aluminum?

A surveyor measured low moisture in June when I bought the boat.

I had the transom cap glassed over. My pro is reworking the gelcoat color match a bit but you can see below how it now looks functionally.

It was $500 to R&I the engine. I could have replaced the aluminum piece with the vinyl part Grady uses today for no extra - they were willing to send it to me as a customer goodwill warranty claim. Or I could have a stainless steel piece custom made for $400 extra. I chose to have it glassed permanently for $1000 extra.

PXL_20210403_190707069.jpg
 

Pat Hurley

Well-Known Member
Joined
Apr 22, 2020
Messages
247
Reaction score
112
Points
43
Age
66
Location
OCMD
Model
Marlin
That looks great !
boggles the mind as to why it’s not finished like that in the first place.
 
  • Like
Reactions: mr_mbuna

igblack87

Well-Known Member
Joined
Oct 21, 2012
Messages
291
Reaction score
46
Points
28
Model
Fisherman 222
@Fishtales any word from the glass shop? Pictures? Picking up my boat April 30th!
 

Fishtales

Well-Known Member
Joined
Jan 31, 2005
Messages
8,019
Reaction score
1,284
Points
113
Just starting... Long story. 2006 Marlin which was splashed in 2007.
 
  • Like
Reactions: atlgrady

Toothpick 10

Well-Known Member
Joined
Oct 17, 2017
Messages
170
Reaction score
42
Points
28
Location
Newburyport, MA
Model
Islander
I have a 2002 Islander and I expect to be replacing my transom and fuel tank soon. However, when you consider the price of a new boat, the cost of these repairs is really a small fraction of that cost.

BOAT: Bust Out Another Thousand!!
 

Fishtales

Well-Known Member
Joined
Jan 31, 2005
Messages
8,019
Reaction score
1,284
Points
113
At this point, I just want it done so I can install the new helm seat and get the spring work done so I can splash her.
 
  • Like
Reactions: Meanwhile

Fishtales

Well-Known Member
Joined
Jan 31, 2005
Messages
8,019
Reaction score
1,284
Points
113
Saw the boat today after work. Progress being made. I didn't get to speak to the shop but I was pleasantly surprised that the repair was only 2" in length from the top of the bang plate area. Fully glassed and ready for final glass work and gelcoat. Maybe just maybe, I'll get her back mid next month. Pics to follow.
 

el jefe

Well-Known Member
Joined
Jan 18, 2008
Messages
222
Reaction score
12
Points
18
Location
Miami
Model
Marlin
Saw the boat today after work. Progress being made. I didn't get to speak to the shop but I was pleasantly surprised that the repair was only 2" in length from the top of the bang plate area. Fully glassed and ready for final glass work and gelcoat. Maybe just maybe, I'll get her back mid next month. Pics to follow.
This might sound obvious, but make sure you get a good wax/polish, or whatever you use, in the well area and transom. I just did a bang plate replacement along with a repower and it so much easier to get to those areas without the engines and rigging in the way.
 

HMBJack

Well-Known Member
Joined
Dec 11, 2005
Messages
797
Reaction score
142
Points
43
Location
Half Moon Bay, CA.
So great to hear that the repair was only needed 2 inches down from the bang plate.
Of course, your fiberglass guy didn't think it necessary to go beyond 2 inches.

I'm curious why, how? there could have been no structural weakening of the transom if that area was wet.
Like - how could it not have affected more area if there was leakage under the bang plate?
Your opinion please... Thanks. We are all learning here from your transom job.
 
  • Like
Reactions: igblack87

Fishtales

Well-Known Member
Joined
Jan 31, 2005
Messages
8,019
Reaction score
1,284
Points
113
So great to hear that the repair was only needed 2 inches down from the bang plate.
Of course, your fiberglass guy didn't think it necessary to go beyond 2 inches.

I'm curious why, how? there could have been no structural weakening of the transom if that area was wet.
Like - how could it not have affected more area if there was leakage under the bang plate?
Your opinion please... Thanks. We are all learning here from your transom job.
I will review the fix and get pics and details as I only saw the repair yesterday and nobody was around to explain it yet.

I had two quarter size delam bubbles at the very top of the motor well just under the bang plate. I believe we got it early and damage was limited. I was initially told up to 8" may need to go based on like jobs in the past and that they would re-do the motor well drains as well if they go that far. With the repair only being 2" the motor drain tubes are not affected. I kinda wish they were done but that would be evidence that the damage was more than the delam areas that I observed - either way, I just want the issue addressed and the boat in the water. More to come.
 

Fishtales

Well-Known Member
Joined
Jan 31, 2005
Messages
8,019
Reaction score
1,284
Points
113
Update. Transom has been repaired. Repair was much less than anticipated. I believe we got it very early. Only approx 3” of glass needed. Engines going on this week. Hopefully will get it by the weekend for final prep.
 

Attachments

  • 5B5AEF55-EF5E-4704-9F56-6C1795290129.jpeg
    5B5AEF55-EF5E-4704-9F56-6C1795290129.jpeg
    2 MB · Views: 167
  • 8D62BBD4-CC24-44D2-8D8C-208FA8E92392.jpeg
    8D62BBD4-CC24-44D2-8D8C-208FA8E92392.jpeg
    2.4 MB · Views: 167
  • C9BD77CC-B001-4EF9-87EF-4AAD6AC0FB07.jpeg
    C9BD77CC-B001-4EF9-87EF-4AAD6AC0FB07.jpeg
    2.3 MB · Views: 166