Twist Latch

Make one using starboard. ( A fried who does woodworking and a scrap of starboard)
That said, it was used on so many Grady models and years, Grady probably would stock it.
 
Last edited:
Find comparable Stainless stock and modify to suit; or have local fabricator construct from Stainless to match existing.

Another option is to install flush mount latch pic'd below. Or Install hidden catch inside hatch - see below pic as well.




Flush mount

1698259829958.png

Hidden Catch = Ball Catch (adjustable hold tension)

1698260124835.png1698260124835.png
 
  • Like
Reactions: Chutch
It's not a lock. It's just a flat piece of plastic with a hole in the center. It looks like the 'latch' for the anchor locker lid. The examples of latches shown above would be difficult to mount if possible. Other type of latches could work but would be overkill. Here is a draw latc that would work if your issue is the anchor locker lid. It is the same latch that is common on the helm seat lockers on many models.
 
  • Like
Reactions: Chutch
Thanks for the responses. it is for the anchor hatch on the bow and one for the fish box in the stern. I have some left over Starboard i'll use to make a replacement.
 
  • Like
Reactions: A&J Outdoors