I'm T-minus on purchasing a pair of slightly used F250XCAs to replace my 2005 F225TXRDs on my 265 Express. Out of curiosity, has anyone done this, and aside from the new binnacle and shift/throttle harness, do I face a challenge with needing to replace the steering cylinder, or other bits and pieces?
Upgrading Yammies - can I keep my steering?
- Thread starter Uncle Binky
- Start date
SkunkBoat
Well-Known Member
- Joined
- Oct 12, 2017
- Messages
- 4,508
- Reaction score
- 1,614
- Points
- 113
- Location
- Manasquan Inlet NJ
- Website
- www.youtube.com
- Model
- Express 265
If it has a seastar HC5345 it will work for both. Dunno what tie bar you have but that probably works too.
Go to the seastar DOMETIC website and look at their chart for yammie motors by year.
https://documents.dometic.com/media/download/97737?templateId=0&previewPdf=1
Go to the seastar DOMETIC website and look at their chart for yammie motors by year.
https://documents.dometic.com/media/download/97737?templateId=0&previewPdf=1
Last edited:
- Joined
- Mar 1, 2006
- Messages
- 3,027
- Reaction score
- 1,351
- Points
- 113
- Location
- Berea, KY/Cross, SC
- Model
- Seafarer
Possibly the key switches. Something is different about the DEC/XCA motors needing a new switch. Also the gauges as they will need to be digital. I just repowered and replaced everything,, key switch, gauges, binacle and engine wiring harness as the XCA motors are FBW,,, all the cables go away.
kirk a
Well-Known Member
- Joined
- Sep 26, 2009
- Messages
- 403
- Reaction score
- 132
- Points
- 43
- Location
- Massachusetts
- Model
- Express 330
last fall i researched a repower go go from old mechanical motors to new. There were a number of options, including going with digital controls, but retaining the existing sea star steering, which i did. The ignition set up (keys n such) was different, and the gauges are new - ended up going with the round gauges to match holes in dash, but could have upgraded to a touch screen.
