V- Birth storage cover pulls

[Fishtales]

I had someone try to open one of the storage bins in the V-birth with the cushion in place and weight on it. The chrome disc pull broke off the shaft. Does anyone know where to source or have a part number?

 

[DennisG01]

I would assume a dealer could get that... maybe have it in stock? But besides that... what type of "pull" is it? Is it a solid pull like would be available at Lowe's? Or is it a "pop-out" style? If it's a pop-out style, maybe it's made by Hafele? I had that style in my Sea Ray.

 

[Fishtales]

Looks like a couple of quarters with a shaft welded to the with a shaft that goes through the bulkhead. Has a couple of washers on the backside. The disk sits flush and the cushions go over. When you open the bulkead (on hinges), you grab the disk and it pulls up about 3" so you get a good grip on it. The backside washers engage the backside of the bulkhead and you can pull up and open the bulkhead. I think most of the cabin models have these pulls.

 

[Poolmaker]

Try boat outfitters

 

[Fishtales]

Thanks. Found this one there. Close and may work. I don't think the GW one has a spring. Gota match it up.

Stainless Steel Hatch Pull

Upgrade your boat with a stylish and durable stainless steel hatch pull from Boat Outfitters. Shop now and get the best prices!

www.boatoutfitters.com

 

[Poolmaker]

They are the same as the one in the live well lid minus the spring. At least in my 95 Marlin.
You can easily remove the spring.

 

[Fishtales]

Cool. Thanks.