Where can I find a replacement for the diverter valve that controls the flow to my live well and salt water wash down. 89 Offshore 24? The one with the handle on the outside and the body on the inside of the bilge area.
Wash Down Diverter valve
- Thread starter 86'240 Offshore
- Start date
enfish
Well-Known Member
- Joined
- Oct 17, 2006
- Messages
- 444
- Reaction score
- 72
- Points
- 28
- Location
- San Marcos, CA
- Model
- Adventure
no its different.
it has 3 hose attachments. 1 for supply water and the others lead to the washdown and live well. The diverter handle switches the flow to one or the other.
it has 3 hose attachments. 1 for supply water and the others lead to the washdown and live well. The diverter handle switches the flow to one or the other.
diverter added pump
Did not like that set up from the start... My 240 is an 86...The control switch was a dual throw from the factory and already wired from the factory.. I found the wire in the stern bilge and added a small pump for the baitwell . I moved the shurflow washdown pump slighty after going through a few due to corrosion. It was mounted way to low in the bilge. The origional switch was even labeled as washdown up and aerator down (center off).
Did not like that set up from the start... My 240 is an 86...The control switch was a dual throw from the factory and already wired from the factory.. I found the wire in the stern bilge and added a small pump for the baitwell . I moved the shurflow washdown pump slighty after going through a few due to corrosion. It was mounted way to low in the bilge. The origional switch was even labeled as washdown up and aerator down (center off).