What size anchor chain for Express 360?

Joined
Aug 26, 2018
Messages
24
Reaction score
19
Points
3
Age
57
Model
Express 360
My anchor chain is starting to leave stains on the bow pulpit and I was thinking of replacing it. My best option would probably be to just take the old one with me to size the chain at the store but I was wondering if anyone knows the size that comes standard on the 360 with windless. I looked through the manuals but didn't see anything unless I just missed it.

Thanks
C
 

seasick

Well-Known Member
Joined
Aug 19, 2008
Messages
9,530
Reaction score
1,420
Points
113
Location
NYC
It depends on the windlass make and model, not the boat model Assuming that your current chain works well, I suggest you bring it to the store to match it.
You can also look up the info on the web site of the windlass manufacturer but you will need the model info.
 

Lsquared

Well-Known Member
Joined
Apr 9, 2018
Messages
178
Reaction score
25
Points
28
The size anchor goes by weight of boat. the weight of the anchor goes by type of anchor used. the type of anchor used is dependent on what type of bottom you mostly anchor in. Below is a sizing guide by Mantus.
fluke is good for mud, plow is good for sand, graple is good for rock
The chain is important for holding power and should be 1' of chain per 1' foot of boat length

Achor size
https://www.mantusmarine.com/mantus-anchor-knowledgebase/anchor-sizing/

Anchor type
https://www.mantusmarine.com/mantus-anchor-knowledgebase/anchor-choice/
 

Fishtales

Well-Known Member
Joined
Jan 31, 2005
Messages
8,029
Reaction score
1,286
Points
113
Given the limited use, why replace? I'd restring the rope and reuse the chain.